Ivar

Lista de precios Ivar 2021

660 páginas
58.8 MB


El acceso a este documento está restringido
a los usuarios registrados.

Haz clic aquí questo link para abonarte a Pinaxo
y consultar las listas de precios de Ivar





Volver a los documentos de Ivar

Índice de contenidos

  • RADIATOR AND FAN-COIL VALVES
    • OPTIMA
    • Thermostatic heads
    • HARMONIA
    • Thermostatic valves
    • Manual valves
    • Lockshields
    • BASIC series valves
    • Radiator kits
    • H valves
    • 4-way distributors
    • Single-pipe thermostatic valves
    • Single-pipe manual valves
    • Accessories for single-pipe valves
    • Fittings
    • Accessories and spare parts
    • Fan-coil valves
    • Fan-coil unit kit
  • PIPES AND FITTINGS
    • Pipes
    • Press fittings M•P
    • Press fittings P•M•P
    • Press fittings M•P•L
    • Press fittings P•M•P•L
    • Accessories for M•P - M•P•L
    • Basic fittings
    • Screw fittings
    • Under-floor fittings
    • Tools and general accessories
  • MANIFOLDS
    • EASY•RADIANT
    • Brass-rod manifolds
    • Stainless steel manifolds
    • Technopolymer manifolds
    • Cabinets
    • Terminals for manifolds
    • Air vent valves
    • Brackets
    • Bypass valves
    • Fittings and plugs
    • Complementary items
    • Ball valves
    • Zone valves
  • RADIANT SYSTEMS
    • FLOORMIX
    • 2-way axial valves
    • COMBIMIX
    • TECHNOMIX
    • MULTIFLOOR
    • UNIMIX
    • UNIMIX•C
    • Accessories for UNIMIX - UNIMIX•C
    • UNIFLOOR
    • Pumps
    • IC•BOX
    • Floor systems
    • Ceiling-wall systems
    • Accessories for floor systems
    • Accessories for ceiling-wall systems
    • Dehumidifiers
    • Hygrostats
  • THERMAL POWER STATION
    • DIRTSTOP®
    • DIRTSTOP® XL
    • POLIFEMO®
    • BRIX
    • MULTIMIX
    • MULTIMIX•C
    • Accessories for MULTIMIX - MULTIMIX•C
    • VARIMIX
    • Storage tanks
    • Mixing valves for high flow capacity
    • Thermostatic mixing valves
    • Rotor mixing valves
    • Safety valves
    • Automatic filling groups
    • Bypass valves
  • REGULATION AND CONTROL
    • CUBODOMO®
    • CLIMA•HUB
    • EQUICALOR•LINk
    • Thermostats
    • Electrothermal heads
    • Motors
    • Wiring accessories
    • Safety thermostats
  • HYDRAULIC BALANCING
    • Static balancing valves
    • PICV
    • EQUIFLUID
  • SATELLITE MODULES
    • IVAR•ESAT DUAL
    • IVAR•SAT
    • E•SAT - M•SAT
    • SAP - SAP•C
  • SANITARY SYSTEMS
    • IS•BOX
    • EASY•LOCK
    • BASIC series manifolds
    • Accessories for sanitary manifolds
    • RTV
    • LEGIO•BOX
    • Thermostatic blenders
    • Safety units
    • SAFEMIX
    • Safety valves
    • Check valves
    • Strainers
    • Pressure reducing valves
  • SYSTEMS FOR GAS
    • MULTI•PRESS•GAS
    • Isolation valves for meters
    • Distribution and isolation
    • Accessories for gas systems
  • METERING SYSTEMS
    • 3-way modules
    • 2-way modules
    • Modules for DW metering
    • Special modules
    • Accessories for metering modules
    • Meters
    • CALOR•MET
    • Data centralisation
  • SOLAR SYSTEMS
    • Circulation groups
    • Electronic control units
    • Accessories for solar systems
    • Pipes and fittings



Contenidos relevantes

Ivar press fittings m•p•l
Ivar basic series valves
Ivar fan-coil valves
Ivar lockshields
Ivar manual valves
Ivar harmonia
Ivar press fittings p•m•p•l
Ivar under-floor fittings
Ivar easy•radiant
Ivar technopolymer manifolds
Ivar terminals for manifolds
Ivar air vent valves
Ivar complementary items
Ivar floormix
Ivar 2-way axial valves
Ivar combimix
Ivar technomix
Ivar multifloor
Ivar unimix
Ivar unimix•c
Ivar unifloor
Ivar pumps
Ivar ic•box
Ivar floor systems
Ivar ceiling-wall systems
Ivar dehumidifiers
Ivar hygrostats
Ivar dirtstop®
Ivar dirtstop® xl
Ivar polifemo®
Ivar brix
Ivar multimix
Ivar multimix•c
Ivar varimix
Ivar automatic filling groups
Ivar bypass valves
Ivar cubodomo®
Ivar clima•hub
Ivar equicalor•link
Ivar thermostats
Ivar motors
Ivar wiring accessories
Ivar picv
Ivar equifluid
Ivar ivar•esat dual
Ivar ivar•sat
Ivar e•sat - m•sat
Ivar sap - sap•c
Ivar is•box
Ivar easy•lock
Ivar basic series manifolds
Ivar rtv
Ivar legio•box
Ivar safemix
Ivar safety valves
Ivar check valves
Ivar strainers
Ivar multi•press•gas
Ivar distribution and isolation
Ivar 3-way modules
Ivar 2-way modules
Ivar modules for dw metering
Ivar special modules
Ivar meters
Ivar calor•met
Ivar data centralisation
Ivar accessories for m•p - m•p•l
Ivar isolation valves for meters
Ivar accessories for gas systems
Ivar single-pipe thermostatic valves
Ivar single-pipe manual valves
Ivar accessories for floor systems
Ivar electronic control units
Ivar accessories for solar systems
Ivar g 1” g 1” 1/4
Ivar accessories for unimix - unimix•c
Ivar accessories for single-pipe valves
Ivar accessories for metering modules
Ivar +b
Ivar +l
Ivar tr
Ivar tp
Ivar thermostatic mixing valves
Ivar accessories for sanitary manifolds
Ivar mixing valves for high flow capacity
Ivar accessories for ceiling-wall systems
Ivar accessories for multimix - multimix•c
Ivar vbvsaslancing
Ivar pehd
Ivar pe-x
Ivar sap•c
Ivar equimeter
Ivar equicompact
Ivar a = (ways - 1) × h + (2 × f )
Ivar ys - ) × h + f1 + f2
Ivar a = (wa
Ivar analytical index and code list
Ivar in your favourite language
Ivar thermal power station
Ivar regulation and control
Ivar hydraulic balancing
Ivar satellite modules
Ivar sanitary systems
Ivar solar systems
Ivar ...
Ivar now available
Ivar q5 fixing kits
Ivar amu 01 fixing kits
Ivar or
Ivar km01t
Ivar km02m
Ivar km03m km04m
Ivar focus 1: pre-regulation
Ivar focus 2: ring nut substitution
Ivar focus 1: temperature limitation and lock focus 2: liquid expansion sensor
Ivar focus: static and dynamic
Ivar focus: ring nut substitution
Ivar focus: pre-regulation
Ivar drm series: double micrometric
Ivar focus: age 15 telescopic fitting
Ivar focus: u-fittings
Ivar focus: screw fittings for both multilayer and pex pipe
Ivar focus: outlets misalignment (for 1” manifolds only)
Ivar focus: splitter fitting ac 647
Ivar focus: fittings for multilayer and pex pipe
Ivar focus: aquastop
Ivar focus: inlet port with swivel fitting
Ivar focus: mixing kits
Ivar focus: kit per alta temperatura
Ivar focus: hydraulic separation
Ivar focus: three- and four-way mixing
Ivar plus (is•box)
Ivar mt
Ivar mt ht
Ivar mt sol
Ivar plus
Ivar plus (equimeter)
Ivar plus (equicompact)
Ivar +r*
Ivar +t
Ivar adjustment and position memory.
Ivar +rcr*
Ivar +rc
Ivar finishes
Ivar +m
Ivar 1,50
Ivar 1,25
Ivar 0,75
Ivar 2,00
Ivar can be connected in series
Ivar is•box plus
Ivar is•box mplus
Ivar single-hop
Ivar multi-hop
Ivar triple action
Ivar 30 %
Ivar world business branches
Ivar countries where ivar trades
Ivar production sites
Ivar iso 9001 iso 14001 iso 45001 iso 50001
Ivar rapporti commerciali
Ivar prodotti mass market
Ivar mass market products
Ivar certificazioni aziendali corporate certifications
Ivar and customized solutions
Ivar filiali commerciali nel mondo
Ivar e soluzioni personalizzate
Ivar paesi con cui ivar intrattiene
Ivar stabilimenti produttivi
Ivar • minimal and elegant design, suitable for modern heated towel rails • several finishes available • head with internal liquid expansion thermostat • equipped with selector for flow rate pre-regulation • ring nut can be replaced even when the system is working
Ivar • no temperature imbalances in rooms • better regulation accuracy • lowered return temperature, with a significant increase of condensing boiler
Ivar efficiency
Ivar • available with anti-tamper ring nut and temperature limitation/lock functions • liquid expansion sensor
Ivar standard series
Ivar n series
Ivar • compact and pre-assembled for an easy and quick installation • multifunction: 5 operating and maintenance modes • simplified system maintenance • flow control via picv • flow measurement and precise balancing thanks to the venturi orifice and
Ivar intermediate layer
Ivar bonding layers
Ivar inner and outer layer
Ivar • particularly flexible • good strength characteristics at high temperatures • economically competitive
Ivar • material with low surface roughness, reduces the risk of scale • highly resistant to chemical agents and especially to chlorinated water • high mechanical strength at both high and low temperatures
Ivar • compatible with all th - h/r - u - b/be - f crimping profiles • complete range of figures • ø from 16 to 63 mm
Ivar • compatible with all th - h/r - u - b/be - f crimping profiles • maximum corrosion resistance • ø from 16 to 32 mm
Ivar • compatible with all th - h/r - u - b/be - f crimping profiles • complete range of figures • ø from 16 to 32 mm
Ivar • automatic alignment thanks to offset threads • offset female thread to house and safeguard the o-ring during installation • available with 3, 4 or 5 outlets and main fitting 1” • versions with outlets 3/4” ek and m24 • o-ring for soft seal: no additional sealant required
Ivar examples of application for easy•radiant manifold accessories
Ivar mechanical processing.
Ivar 100% of production.
Ivar • each manifold is tested to guarantee grip on assembled components and on
Ivar • subject to stress relieving heat treatment to remove residual tension due to
Ivar • compatible with both low and high temperatures.
Ivar examples of application for brass rod manifold accessories
Ivar single manifold dimensions
Ivar 1”1/2 single manifold dimensions
Ivar manifold kit dimensions and suitable cabinet
Ivar • large transit section for increased flow rate. • lightweight and easy to install. • compatible with both low and high temperatures. • optimal mechanical resistance to corrosion • competitive price
Ivar examples of application for stainless-steel manifold accessories
Ivar 1“1/4 single manifold dimensions
Ivar 1“ single manifold dimensions
Ivar • rugged and lightweight composite materials. • limited formation of condensation. • resistance to chemicals, uv rays and corrosion. • suitable both for radiant heating and cooling systems.
Ivar manifolds kit width and suitable cabinet
Ivar two multi-function fittings
Ivar accessories
Ivar booster unit
Ivar mixing unit
Ivar • complete compact system for radiant system control • fixed point or climate control • two-way mixing control valve • pump centre-to-centre distance 130 mm or 180 mm with shutoff valves
Ivar installation layout
Ivar • temperature control carried out by a two-way valve («injection» system)
Ivar • available with fixed point or weather compensated regulation. • reversible system: connection to primary from right or left.
Ivar to obtain maximum compactness.
Ivar • integrated thermostatic insert for optimal fixed station control (28-53 °c) • designed to control medium size residential systems • balancing valve and control integrated on primary circuit
Ivar • compact system for radiant heating and cooling • fixed point or climate control • three-way mixing control valve • manifold kit with dedicated straight branches
Ivar supply block with accessories booster pump 3-way mixing valve
Ivar • compact system for radiant heating and cooling • fixed point or climate control • 3-way mixing control valve • manifold kit with dedicated straight branches
Ivar delivery block with accessories boosting pump 3-way mixing valve
Ivar 26 mm
Ivar • suited for lowered installations with reduced thermal inertia • light system that can also be installed in lofts or in areas with low load resistance • compatible with piping with standard diameter of 16 or 17 mm
Ivar • easy to install as a traditional system and with dimensions comparable to a dry
Ivar the slab, reducing the thermal inertia of the system
Ivar • high compressive strength for a robust and easy to install panel
Ivar 37 mm
Ivar • the high-density graphite insulating layer thermally separates the screed from
Ivar system
Ivar • easy to install • suitable for piping with 16 and 17 mm diameter • available in different thicknesses and thermal resistance values, compatible
Ivar ≥ 66 mm
Ivar with all types of installation provided for by standard uni en 1264
Ivar ø16/2 - ø17/2 mm
Ivar easier to lay the system
Ivar • ashlars with extremely high resistance to being walked on in order to make it
Ivar • thanks to the heat-formed ashlar panel with undercut, the system ensures easy
Ivar coupling between the panels and firm fixing of the pipe, with no additional clip
Ivar 5 cm
Ivar • it can also be installed in tight spaces thanks to the lowered version 10 mm thick
Ivar higher-performing insulation material, thickness being equal
Ivar • excellent thermal insulation even in the case of material with reduced thickness • superior class panel that combines the advantages of fast-therm with a
Ivar formed film
Ivar • insulation panel made of polystyrene sintered with graphite and with heat-
Ivar ≥ 56 mm
Ivar • flat system suited for installations in the tertiary and industrial sectors • quick laying of the pipe thanks to the graphic references for choosing the step • flexible installation, with clips anchored directly to the panel or to the support
Ivar mesh
Ivar ø16/2 - ø17/2 - ø20/2 mm
Ivar • made exclusively of natural and non-toxic materials • unlimited service life • used in “green” construction, as well as in the industrial sector, thanks to its
Ivar high compression resistance
Ivar ø16/2 - ø17/2 - ø20/2 - ø25/2,3 mm
Ivar • vapour barrier incorporated in the panel and overlapping for ideal coupling of
Ivar ≥ 126 mm
Ivar • system specifically designed for industrial applications, thanks to compression
Ivar the panels
Ivar • flexible installation with clips or with anchoring rail
Ivar resistance of up to 500 kpa
Ivar ≥ 140 mm
Ivar • modular system with standard dimensions 60x60 cm, completely removable and
Ivar reusable
Ivar • steel panels with smooth or micro-perforated surface • system with extremely high response speed
Ivar • reduced installation dimensions • it can be used in false ceilings, wall covering or mixed installation • multiple dimensions available for optimised laying
Ivar size panels and the same connection fittings
Ivar • high fire resistance • it can be installed under conditions of high humidity (for example, in bathrooms)
Ivar ø20/2 mm
Ivar • it can be used in combination with the eco-clima system thanks to the same-
Ivar ≥ 96 mm
Ivar ø10/1,3 mm
Ivar 2,5 cm
Ivar • extremely reduced installation thickness • pipe anchored to the rail for totally flexible use • easy to install
Ivar • limescale action: phosphate dosage prevents precipitation of calcium and
Ivar • protective action against corrosion thanks to silicate dosage • filtering action by 100 μm mesh • level indicator with transparent glass for easy inspection • robustness and reliability: brass cap, simple and effective operation principle
Ivar magnesium carbonates
Ivar • neutralizing action to prevent corrosion from acid condensation. • quick and easy maintenance thanks to the stainless-steel neutralizer
Ivar charge container which facilitates the refilling and replacement of the neutralizing charge.
Ivar • reversible connections to easily adapt to different installation positions. • extremely compact to easily find a place under the boiler. • transparent body to always keep the neutralizing charge level under control.
Ivar • compact, modular and expandable • integrated hydraulic separator in main manifold • possibility of supply from top to bottom, right/left • pre-assembled configurations available • suitable for heating and cooling
Ivar • compact and flexible (2 or 3 zones) • integrated hydraulic separator in main manifold • pre-assembled configurations available • suitable for heating and cooling
Ivar manifold/separator
Ivar • easy to install • compact and neat • completely reversible • versatile and customisable • suitable for heating and cooling
Ivar distribution and mixing kit
Ivar direct distribution kit
Ivar hydraulic separator
Ivar modular manifold
Ivar sector mixer valves
Ivar • seal on rotor piston ensured by 2 large section o-rings • external o-ring easily replaced when necessary • plate with graduated scale, easily removable and rotated to adapt travel to select-
Ivar system requirements
Ivar • different kv values for the same size, to enable more targeted use according to
Ivar • much lower weight and reduced dimensions in proportion to strength
Ivar compared to traditional valves in cast iron
Ivar ed configuration of inputs/outputs
Ivar 4-way valves
Ivar safety valves for heating applications
Ivar example of cubodomo system application
Ivar starter pack: master sensor with relay
Ivar starter pack: cube
Ivar actuators
Ivar relay sensor (with actuator function)
Ivar sensors without relay
Ivar wiring center
Ivar • multi-zone system: customised comfort in every area • wireless communication among devices • remote control via software and web manager • advanced energy-saving management functions • intuitive multilingual menu with guided configuration • ideal for climate control in public buildings
Ivar home network
Ivar • dynamic balancing of variable flow systems • optimisation of the operation of centralised systems • improvement of control valve operating conditions in the balanced circuit • reduction of noise phenomena
Ivar delay, plumbing flow rate check by flowmeter, anti-lock function, fouled exchangers warning, pwm circulator control in heating mode, intelligent automatic loading.
Ivar • energy saving thanks to electronic temperature control of the boiler return. • power of the heat exchanger in dhw production up to 55 kw. • electronic dhw temperature control. • heat exchanger power for heating up to 24 kw. • electronic control with external compensation for the heating delivery
Ivar • electronic intervention for: circuit temperature monitoring, water hammer
Ivar temperature.
Ivar application example
Ivar • available in the following versions: high temperature (ivarsat h), low
Ivar • can be equipped with domestic hot water recirculation fittings • flush- or wall-mounted installation • electronic management of domestic hot water priority • ideal dhw delivery temperature control via thermostatic mixer
Ivar temperature (ivarsat l/le), combined (ivarsat hl/hle)
Ivar installation layouts
Ivar • available with white or chrome finish • completely pre-assembled
Ivar single reversible plate (hot/cold) with supply terminal icon
Ivar knobs with
Ivar new ergonomic
Ivar design
Ivar 3/4” or 1” main
Ivar available with
Ivar automatic alignment by hand thanks to offset threads. no tightening tool is required. o-ring for soft seal: no additional sealant such as hemp or teflon required.
Ivar manifold dimensions (octagonal section)
Ivar (round section)
Ivar manifold dimensions
Ivar manifold dimensions (round section)
Ivar a -b - c
Ivar • available in sizes dn 15-20 with 1/2" f - 3/4" f connections in the 3 variants
Ivar • wide temperature regulation range 35 °c – 60 °c • reduction of heat dispersion thanks to limitation of maximum flow rate in
Ivar • an anti-legionella cycle with mechanical or electronically controlled bypass
Ivar can also be included
Ivar circuit branches.
Ivar • maximum comfort thanks to constant temperature • including inlet check valves • anti-scald safety device: if there is no cold water the valve closes automatically
Ivar ter may undergo thermal shocks from an anti-legionella cycle
Ivar • recommended where there are dhw storage tanks where the accumulated wa-
Ivar avoiding the scalding of users
Ivar • anti-contamination function thanks to the built-in check valve • special versions for hard water with a ptfe seal or for acidic water with a stainless
Ivar • safety function against overpressure (safety valve set at 7 bar)
Ivar steel seal
Ivar • a thermostatic mixer and a safety unit in a single component • ease of installation • including a dielectric connection for electrical insulation
Ivar safety valves for sanitary applications
Ivar • ea type devices, can be inspected: because of the two control ports,
Ivar the correct operation of the check valve can be verified
Ivar • suitable for applications with category 2 water
Ivar • protects the lines from excessive pressure • reduces wasted water • prevents noise phenomena in the lines • the filter can be cleaned without having to remove it
Ivar • compatible with th - b/be crimping profiles • complete range of figures • ø from 16 to 32 mm
Ivar • freely configurable with volumetric meters for dhw, dcw and dual water • simplified and patented procedure for balancing utilities • connections to utilities with 3/4” flat-seal fittings for all versions • pre-assembled or in a template with separate components
Ivar • suitable for applications with electronic variable displacement pumps • prearranged for use with equifluid for dynamic balancing of utilities • extremely compact for installation in any compartment
Ivar • freely configurable with volumetric meters for dhw, dcw and dual water • equipped with a picv valve for dynamic balancing of the flow rate • pre-assembled or in a template with separate components
Ivar • minimal risk of sticking between rotor and body in the event of extended inactivity
Ivar • compact solution ideal for thin walls (installation thickness of only 60 mm)
Ivar • manual draining and cut off available for maintenance operations
Ivar b c
Ivar 13 12 11 10
Ivar 9 8 7 6 5 4 3 2 1
Ivar heat cost allocator
Ivar key for metering units
Ivar domestic water lines
Ivar patented system
Ivar control block
Ivar liquid sensor
Ivar pre-adjustment of flow rates
Ivar dynamic balancing
Ivar harmonia series valves
Ivar temperature control
Ivar the most suitable regulating cartridge can be chosen for each valve:
Ivar 50 °c / 36-50 °c - max 90 °c
Ivar 50 °c / 36-50 °c - max 120 °c
Ivar 63 °c / 50-63 °c - max 90 °c
Ivar mt 00
Ivar mtgds 05
Ivar mtgds 00
Ivar silver
Ivar chrome
Ivar white
Ivar inox
Ivar black
Ivar flat•industry (pag. 318)
Ivar mini•graph (pag. 306)
Ivar fast•org (pag. 308) fast•graph (pag. 312)
Ivar h 126 mm
Ivar flat•bio (pag. 316) flat•org (pag. 314)
Ivar fast•therm (pag. 310)
Ivar h 66 mm h 56 mm h 37 mm h 26 mm
Ivar slim (pag. 304)
Ivar temperature lock
Ivar anti-tampering nut available
Ivar temperature limitation
Ivar n series (kv 0,1-0,6)
Ivar 5 operating modes
Ivar applications
Ivar rv 03 picc 01
Ivar made of plastic
Ivar made of aluminium alloy
Ivar a strong adhesive guarantees adhesion of the layers
Ivar for maximum seal
Ivar guide for
Ivar correct crimping
Ivar can be rotated
Ivar solution-treated stainless steel to protect the crimper
Ivar double o-ring for maximum seal after crimping
Ivar double o-ring
Ivar even after
Ivar sawtooth profile for maximum pull-out resistance
Ivar after crimping
Ivar extended slots to check for proper pipe insertion
Ivar shaped bushing with a teflon ring with leak indication during the system test.
Ivar crimping
Ivar fitting
Ivar optimized water flow (reduced pressure loss)
Ivar download
Ivar fluxer®
Ivar insert with
Ivar lockshield
Ivar thermostatic control option
Ivar 1. air-vent valve 2. flow temperature sensor 3. pump isolation valves 4. booster pump 5. safety thermostat pocket 6. thermometer 7. fill/drain valve connection
Ivar weather-compensated adjustment
Ivar fixed-point adjustment
Ivar two-way valve with pre-mixing port two-way valve two-way valve with pre-mixing port two-way valve
Ivar 3. high-efficiency variable rpm pump; centre-
Ivar 4. shutoff ball valve
Ivar controlled by thermostat head
Ivar to-centre distance 130 mm or 180 mm
Ivar 1. 2-way control valve with motor drive or
Ivar 2. mixing balancing valve
Ivar 5. filler/drain valves 6. automatic air purge valves 7. thermometers
Ivar connectors on combimix using two ac 606 nipples
Ivar the combimix system offers two options to supply high temperature components directly using the boiler fluid: 1. horizontal version, with standard manifolds connected to the primary
Ivar manifolds and all required accessories.
Ivar 1 2
Ivar 2. vertical version, using the special kit, including simple or shutoff version
Ivar primary bypass: • recirculation on generator • balancing
Ivar primary bypass: • circulation on generator • balancing
Ivar secondary bypass: • improved mixing control • increased flow rate to circuit
Ivar 3b
Ivar 3c
Ivar 3a
Ivar pipes that can be installed
Ivar multiple laying steps
Ivar free multiple laying steps pipes that can be installed
Ivar minimum installation space
Ivar panels available with smooth (l) or drilled (f) surface supply pipes that can be installed
Ivar panels with plasterboard surface supply pipes that can be installed
Ivar panels with plasterboard surface, water and fire-resistant supply pipes that can be installed
Ivar supply pipes that can be installed
Ivar ultra compact: for easy installation
Ivar even in confined spaces.
Ivar four different installation positions (see fig. 1). body in ixef technopolymer®: extraordinary mechanical properties, comparable to brass. corrosion-resistant. swivelling insert (patent pending): maximum efficiency in any installation position. internal strainer with 800 μm mesh. large settling chamber, with 360° swivel fitting: conveys waste to the drain valve. shutoff drain valve:
Ivar powerful magnet with vertical polarisation to generate a much more uniform magnetic field, thus optimising capture of all impurities.
Ivar that accumulates at the bottom of the settling chamber, via the integrated drain valve.
Ivar simultaneously
Ivar via side connection
Ivar thanks to telescopic connection
Ivar • thermometers, non-return valve
Ivar tnanks to telescopic connection
Ivar • pump with shutoff provision and simplified installation
Ivar • option of fixed point or climate control • pump with shutoff provision and simplified installation
Ivar • three functions:
Ivar • two or three zones, expandable with additional module
Ivar • connections to primary from right, left, top or bottom • connections for multiple heat generators
Ivar - flow manifold - return manifold - hydraulic separator (with shutoff provision)
Ivar • safety thermostat, thermometers, non-return valve
Ivar makes all circulation pumps installed on the secondary and primary circuits completely independent from one another.
Ivar system is running by means of an externally controlled shutter.
Ivar • the separator creates a hydraulic short circuit, which
Ivar • the manifold incorporates the hydraulic separation, an
Ivar • the hydraulic separator can also be shut off while the
Ivar essential function in systems with multiple pumps that can operate simultaneously.
Ivar • option of fixed point or climate control • safety thermostat, thermometers, non-return valve • pump with shutoff provision and simplified installation
Ivar • two or three zones
Ivar • thermometers, non-return valve • pump with shutoff provision and simplified installation
Ivar - delivery manifold - return manifold - hydraulic separator (with shutoff provision before installation)
Ivar • 3 functions:
Ivar or left as required.
Ivar with low temperature heat sources (e.g. heat pumps)
Ivar such as radiant panels for underfloor heating.
Ivar mixing on return to the boiler, thereby avoiding corrosion phenomena due to acid condensation in older generators.
Ivar • used for distribution to low temperature utilities
Ivar nipples.
Ivar • motorised mixer valves for precision control of
Ivar • available in different versions according to the flow
Ivar • enables creation of the main distribution backbone. • connection between individual manifolds via rotary
Ivar with option of creating combined configurations.
Ivar supply temperature.
Ivar • automatic purge valve to remove air bubbles • filler/drain valve on base to remove waste and
Ivar • high-temperature booster module without mixing. • used to supply components such as radiators or
Ivar • this enables the hydraulic separation of various
Ivar towel rails or to heat domestic hot water stored in storage tanks.
Ivar • integrated shutoff valves to enable disconnection
Ivar • completely reversible: can be supplied from right
Ivar • the solution with 4-way mixer valves also enables
Ivar sector mixer valves.
Ivar • distribution from bottom to top or vice versa, also
Ivar • distribution module complete with 3 or 4-way
Ivar of distribution module for easier maintenance.
Ivar circulation pumps installed, keeping the various distribution modules independent.
Ivar • “lt” versions specially designed for applications
Ivar impurities.
Ivar factor kv.
Ivar list
Ivar of cubodomo components
Ivar backlit e-ink display.
Ivar cold/hot operation with programming of each day of the week.
Ivar minimal and elegant design.
Ivar able to operate in pwm mode:
Ivar across a calibrated orifice
Ivar spring/diaphragm action system, which
Ivar keeps the differential pressure constant
Ivar available from dn 15 to dn 50, with female, male or male fittings with a union
Ivar piezometric ports to check operating range
Ivar three types of cartridges, picc 03/13 insert, can be motorised with on/off or proportional actuator
Ivar static balancing
Ivar hc ivar e-sat dual
Ivar ivar e-sat mono
Ivar ivar e-sat tank
Ivar automatic alignment by hand thanks to offset threads. no tightening tool is required.
Ivar knobs with new ergonomic design
Ivar o-ring for soft seal: no additional sealant such as hemp or teflon required.
Ivar indicator incorporated in the knob
Ivar new easy-label technology: it is not necessary to remove the screw to insert the reversible plate, thanks to the interlocking positioning
Ivar outlet interaxis: 35 mm
Ivar to protect
Ivar multi•press gas system - iso 17484 international standard
Ivar iso 17484
Ivar double o-ring in yellow hnbr, en 549 compliant
Ivar stainless steel
Ivar the crimper
Ivar guide for correct crimping
Ivar solution-treated
Ivar manifolds and under-floor valves connections with suitable fittings
Ivar direct metering
Ivar indirect metering
Ivar enables easy and quick cleaning also with the system running (see fig. 2).
Ivar special cleaning via the strainer mesh and lower casing, to be carried out at least once a year.
Ivar • three-way piston mixing valve and secondary bypass
Ivar • 3-way piston mixing valve and secondary bypass
Ivar new
Ivar routine cleaning to remove waste and sludge
Ivar distance between
Ivar centreline of last way
Ivar and end of manifold
Ivar centre-to-centre distance
Ivar distance
Ivar distance between centreline of last way and end of manifold
Ivar centre-to-centre
Ivar ic•box 1 ic•box 4
Ivar ic•box 2 ic•box 5
Ivar ic•box 3
Ivar ra 761
Ivar distribution
Ivar pipe connection to varimix modules
Ivar adjustable thermostatic mixer 35-65 °c
Ivar metal frame with vibration damping brackets
Ivar starter thermostat 40 °c
Ivar 2 2
Ivar the ivar group is a growing business that operates at an international level. established in 1985 as company focused on the production of valves, over the years ivar actively seeks and develops new products reaching high quality standards, to become today one of the leading companies in the sector of plumbing and heating components.
Ivar il gruppo ivar rappresenta una crescente realtà imprenditoriale attiva a livello internazionale. nata nel 1985 come azienda specializzata nella produzione di valvole, negli anni ivar si è attivamente impegnata nella ricerca e sviluppo di nuovi prodotti, diventando oggi leader nel settore
Ivar idrotermosanitario.
Ivar ivar group
Ivar ivar s.p.a. corporate certifications
Ivar erp - energy related products
Ivar versions example - optima
Ivar thermostatic heads, valves and lockshields optima series
Ivar thermostatic heads
Ivar thermostatic valves harmonia series
Ivar versions example - standard series
Ivar thermostatic valves
Ivar versions example - n series
Ivar versions example - 200 series
Ivar versions example - 300 series
Ivar thermostatic valves - versions example
Ivar lockshield valves - versions example
Ivar manual valves - versions example
Ivar radiator valves basic series
Ivar example standard series
Ivar example n series
Ivar radiator kits
Ivar h valves
Ivar 4-way distributors
Ivar accessories and spare parts for single-pipe valves
Ivar accessories and spare parts
Ivar pipes
Ivar press fittings m•p
Ivar press fittings p•m•p
Ivar press fittings with leakage function m•p•l
Ivar press fittings with leakage function p•m•p•l
Ivar basic fittings
Ivar screw fittings
Ivar fittings for under-floor distribution systems
Ivar tools and general accessories
Ivar modular manifolds easy•radiant
Ivar brass-rod manifolds
Ivar stainless steel manifolds
Ivar cabinets
Ivar brackets
Ivar fittings and plugs
Ivar spare parts and complementary items
Ivar ball valves
Ivar zone valves
Ivar floormix - system for radiant heating
Ivar 2-way axial valves for high flow capacity
Ivar combimix - mixing and pump unit for radiant systems
Ivar for special configurations of unimix with pre-assembled manifold kit in the cabinet, please contact
Ivar unimix - mixing and pump unit for radiant systems
Ivar unimix•c - mixing and pump unit for radiant systems
Ivar accessories for mixing and pump units unimix - unimix•c
Ivar ic•box - non-mixed compact radiant system
Ivar minimum thermal resistance of the insulation layer according to uni en 1264-4 standard
Ivar minimum height of floor systems
Ivar panels for radiant floor systems
Ivar radiant ceiling/wall systems
Ivar accessories for radiant floor systems
Ivar accessories for radiant ceiling/wall systems
Ivar dirtstop® - magnetic dirt separator with strainer
Ivar dirtstop® xl - magnetic dirt separator with triple filtering action
Ivar polifemo® - polyphosphates and silicates doser
Ivar brix - acid condensate neutralizer
Ivar multimix - compact boiler distribution system
Ivar multimix•c - compact boiler distribution system
Ivar accessories for compact boiler distribution systems multimix - multimix•c
Ivar varimix - modular system for thermal power stations
Ivar storage tanks
Ivar rotor mixing valves
Ivar cubodomo® - wifi temperature regulation system for smart devices
Ivar clima•hub - electronic controller for weather compensation
Ivar dc 1020 / dc 1030
Ivar ae 1010
Ivar ae 1020
Ivar de 1020
Ivar de 1000
Ivar de 1010
Ivar de 1030
Ivar for quotations, system configuration and more information, please contact
Ivar external sensor
Ivar for specialised personnel: software service
Ivar for the user: the web manager
Ivar gateway
Ivar as 1010
Ivar 3g router
Ivar equicalor•link - wireless temperature regulation and metering system
Ivar room thermostats
Ivar electrothermal heads
Ivar safety thermostats
Ivar index
Ivar static balancing valves
Ivar picv dynamic balancing valves
Ivar equifluid - balancing valves for differential pressure adjustment
Ivar and electronic controller
Ivar ivar•esat dual - heating interface unit with separated heat exchangers
Ivar ivar•sat - satellite modules with metering devices
Ivar e•sat - m•sat - compact satellite modules
Ivar sap - sap•c - fresh water stations
Ivar 3 x g 3/4’’ ek
Ivar 4 x g 3/4’’ ek
Ivar screw type shutoff valves hot and cold water inlets recessed wall-mounting box
Ivar plugs (or supplementary outlets)
Ivar sanitary manifolds is•box
Ivar hot and cold water inlets
Ivar screw type shutoff valves
Ivar easy•lock/basic series g 3/4’’ x ek
Ivar recessed wall-mounting box ac 850
Ivar thermostatic mixer range 35-50 °c screw type shutoff valves
Ivar modular manifolds easy•lock
Ivar modular manifolds basic series
Ivar accessories and fittings for sanitary manifolds
Ivar optima
Ivar download all the technical focuses