Atlas Concorde Solution
Catalog 2024
General sales conditions
A.- CONTRACT COMPLETION
A.1. These general sales conditions govern every sales contract between the Seller and
the Buyer and any amendment or exception thereof shall be agreed in writing.
A.2. Any offers, credits and/or rebates granted by agents or other intermediaries, shall not
be considered valid if they are not confirmed in writing by the Seller.
A.3.- The Buyer shall send the written orders to the Seller, directly or through the agents,
and the orders shall include the codes of the required products, quantity, price and
destination. The order sent by the Buyer is irrevocable.
A.4. The sale shall be deemed completed when: (i) the Buyer receives a written
confirmation from the Seller, via e-mail, fax or other electronic means, that complies
with the terms and conditions of the order; or (ii) if the confirmation sent by the Seller
contains conditions that differ from the order sent by the Buyer, when the latter accepts
it in writing or in any case does not object within 7 (seven) days from reception; or (iii) if
the Seller does not provide a written confirmation, when the products are delivered and
loaded by the Buyer.
A.5. The Buyer shares the need to restrict the sales of Atlas Concorde products to the
national territory. The Seller deems this rule necessary in order to coordinate its sales
policy, streamline its distribution network and provide offers that are suited to the needs
of the single countries. The Buyer acknowledges that this rule is also in its best interest.
The Buyer therefore undertakes to market the products supplied by Ceramiche Atlas
Concorde SpA exclusively in its country of residence, refraining from promoting active
sales, even online, with customers located in the territory of a country different from its
own. As regards triangular operations, this undertaking applies to the country in which the
buyer actually operates. The Buyer may resell the product outside its territory only with
written authorisation from the Seller, or if the sales concern non first-grade products or
products that are out of production.
B.- PRICES
B.1. The prices agreed upon for each individual sale are net prices for cash delivery ex
works (the Seller’s plant shall be specified in the order confirmation), unless otherwise
agreed in writing.
C.- PRODUCT CHARACTERISTICS
C.1. The Buyer declares to have read and comply with the content of the following
documentation published on the corporate website: 1) Laying, use, cleaning and
maintenance manual and 2) Technical data sheets.
C.2. Given the intrinsic variability of the ceramic products, the characteristics of the
samples, previously sent by the Seller to the Buyer, are purely illustrative and cannot be
deemed binding.
C.3. Unless specifically requested and agreed before the order confirmation, the Seller
does not guarantee that the entire quantity of an article on order shall be sent from one
same production lot.
D.- DELIVERY TERMS
D.1. The delivery terms are understood to be indicative and the extension thereof cannot
entitle the Purchaser to request any form of compensation, without exception.
D.2. If, after 14 (fourteen) days from the date of notification that the goods are ready, the
Purchaser fails to collect them, the Seller shall be forced for reasons of occupied space
to return the goods to the storage facilities, thereby incurring additional costs; the Seller
reserves the right to charge the Purchaser such additional costs.
E.- SHIPPING ARRANGEMENTS AND TERMS
E.1. The Buyer must communicate any variation in the destination of the products,
different from the one agreed in the order confirmation, in writing within, and no later
than, the second day before the day foreseen for the collection at the Seller’s premises.
The Seller reserves the right not to accept the change of the product destination. If the
actual destination of the product is different from the one stated by the Buyer, the Seller
reserves the right to suspend the execution of the supplies underway and/or to terminate
the contracts in force and the Buyer shall not have the right to claim direct and/or indirect
compensation of any type.
E.2. Unless otherwise agreed, the goods shall be delivered ex-works (EXW - Incoterms
2010) and this shall also be the case when the parties agree that the delivery, or part of it,
shall be arranged by the Seller on the Buyer’s behalf. In any case, the risks shall transfer to
the Buyer upon delivery to the first carrier.
E.3. Without prejudice to the Seller’s extraneity in relation to the transport contract, the
Seller shall not be indicated as “shipper” on the bill of lading. The communication of the
gross weight of the container to the Forwarding agent does not represent in any way the
undertaking of any liability by the Seller as regards the SOLAS (Safety Of Life At Sea)
Convention. In no event may the said communication be taken to be the VGM (Verified
Gross Mass).
E.4. The Buyer undertakes to ensure that the vehicle sent to the Seller’s warehouse
is suitable for the loading operations, considering the nature of the products. If the
vehicle sent to collect the goods causes difficulties in the loading operations, the Seller
reserves the right to charge a penalty, of 4% of the value of the products, to cover the
extra logistics costs. If the vehicle sent is not at all suitable, the Seller reserves the right to
refuse to load the goods and the Buyer shall not have the right to claim compensation for
any direct and/or indirect cost that may arise therefrom.
E.5. The Buyer is responsible for assigning the carrier the task of checking the products
before loading them; any observations concerning the condition of the packaging and
the correspondence of the quantities loaded with those on the transport document must
be made by the carrier upon collection of the goods. The said observations must be
written on all the copies of the transport documents, otherwise the loaded products shall
be considered to be complete and in good condition. As a result, the Seller shall not be
liable for any missing or damaged products not reported by the carrier.
E.6. The Buyer is also responsible for assigning the carrier the task of checking the loading
procedure and the stability of the goods on the vehicle, in order to prevent damage
during transport and to comply with all road safety provisions.
F.- PAYMENTS
F.1. All payments must be made to the Seller’s registered office. Payments made to
agents, representatives, or sales assistants shall not be considered as made until the
amounts are received by the Seller.
F.2. The Buyer shall not fulfil its payment obligations by making payments from countries
other than its own country of residence, if the said countries do not guarantee an
adequate exchange of information with Italy. In case of breach of the said prohibition, the
Seller has the right to terminate the contract for just cause and the Buyer shall not have
the right to claim compensation for any damage suffered.
F.3. Any costs for stamp duty and bank draft fees shall be borne by the Buyer. Failure to
fulfil, even only in part, the payment shall result in the application of interest on arrears in
favour of the Seller, from the date established for the payment, as envisaged by legislative
decree 09/10/2002 no. 231.
F.4. Unless otherwise agreed in writing, the Buyer undertakes not to offset any
receivables, of whatever nature, owed by the Seller.
G.- CLAIMS
G.1. Upon receipt of the products, the Buyer shall perform a visual inspection in
compliance with instructions provided in point 7 of UNI EN ISO 10545-2 standards.
G.2. The products must be installed and fitted strictly respecting the recommendations
related to the activities to be performed before and during the laying of the product
specified in document 1) Laying, use, cleaning and maintenance manual, published on
the Seller’s website, and on the product packaging and/or inside the packaging. Faults
caused by an incorrect installation and by missing/incorrect maintenance (different from
instructions provided in document 1) Laying, use, cleaning and maintenance manual), by
an unsuitable use and/or by normal wear over time shall not be considered product faults.
G.3. With the exception of the limits of acceptability foreseen by the international EN
14411 (ISO 13006) standard, the parties acknowledge as identifiable faults those product
defects that are immediately visible upon receipt thereof and that make the material
unsuitable for use or that significantly reduce its value. This category includes faults as
defined in the document 1) Laying, use, cleaning and maintenance manual, published
on the Seller’s website. Identifiable faults include, by way of a non-limiting example,
superficial defects, decoration defects, defects concerning polishing, dimensions, surface
flatness, straightness of sides/rectangularity and thickness, cracks, chippings or rough
edges, non-compliant shades, mixed shades and products that feature problems deriving
from the cutting process and/or from chips.
G.4. If the Buyer finds an identifiable fault, it must be reported in writing to the Seller,
within 8 (eight) days from receipt of the products; failure to send the claim shall result
in the forfeiture and loss of such right. The Buyer shall keep the entire lot of material
readily available for the Seller. The claim shall include the invoice details and an accurate
description of the claimed fault together with photographs, where possible. In the event
that the claim proves to be unfounded, the Buyer shall refund the Seller any costs
incurred for an inspection (expert’s reports, travel, etc.).
G.5. Hidden faults shall be notified to the Supplier in writing, by recorded delivery letter
with advice of receipt, within 8 days from the date such fault is found, under penalty of
forfeiture.
G.6. The Buyer’s right to make a claim for faults under warranty is valid for 12 (twelve)
months from the delivery of the products.
H.- WARRANTY FOR FAULTS
H.1. The Seller’s warranty is limited to first grade products and not second or third grade
products or lots on offer with special prices or discounts, which must be duly specified
with a note in the order confirmation.
H.2. The Seller does not guarantee the suitability of the products for particular uses, and
only guarantees the technical specifications published on the website in the document
2) Technical data sheets. The indication for use is merely indicative, even when written in
the Seller’s catalogues and manuals. On the basis of the characteristics described in the
document 2) Technical data sheets, the designer always has the task of assessing the
suitability of the product for the specific use conditions, taking into account the stress
and variables to which the product will be subjected, which may alter its characteristics;
for example, the traffic intensity, quality of traffic (foot traffic with the presence of sand,
debris...), adverse weather conditions and any other unpredictable factor to which the
material may be exposed.
H.3. In the event that identifiable product faults are ascertained, as defined in sub
section G no. 3, the Seller shall replace the faulty product with another one with equal
or superior characteristics; should this not be possible, the Seller shall apply a significant
price reduction. Alternatively, following the return of the faulty products, the Buyer shall
have the right to a refund of the price paid plus the transport cost, with the exclusion of
compensation for any other direct and/or indirect damage.
H.4. The Seller’s warranty shall not be valid if the products that have identifiable faults
(totally or in part) have been used and/or in any case transformed, as this entails that the
Buyer (or its customer) expressed the intention to accept them in the condition in which
they were found.
H.5. In the event that hidden product faults are ascertained, the Seller’s warranty is limited
to the replacement with other products of equal or superior characteristics; should this not
be possible the Seller shall refund the price paid plus the transport cost. In any case, the
Seller’s warranty for any direct and/or indirect damage caused by the faulty product, shall
be limited to an amount that shall not be greater than double the selling price applied by
the Seller, only in relation to the faulty part of the supply.
H.6. In the event that the Buyer resells the product to subjects protected by the consumer
code (law decree no. 206/2005), the former shall be responsible for the conditions
applied, if different from those stated herein, and shall ensure that the consumer’s rights
are exercised, in relation to the remedies and terms established by the said code. If
there are the grounds for the Buyer to exercise the right of recourse and/or make a claim
against the Seller/manufacturer, the said action shall take into account or go beyond the
exemptions and limits established in sub sections G no. 1 and H no. 5.
I. SOLVE ET REPETE (pay and then claim) AND TERMINATION CLAUSES
I.1. Pursuant to article 1462 of the Italian Civil Code, on no account may the Buyer suspend
or delay payment of collected material, including in the event of alleged defects or faults in
the material; this does not affect the right to claim back any payments made unduly (solve
et repete).
I.2. If the Buyer’s financial situation changes or in the event of non-payment (even partial)
of products already supplied, the Seller reserves the right to suspend the execution of the
supplies underway and/or to terminate the contracts in force and the Buyer shall not have
the right to claim direct and/or indirect compensation of any type.
L.- RETENTION OF OWNERSHIP
L.1. The products supplied shall remain exclusive property of the Seller until the Buyer has
paid the full amount.
L.2. During the aforementioned period, the Buyer shall undertake the obligations and
responsibilities as bailee (also referred to as custodian) and shall not transfer the said
products, grant their use, let them be seized or distrained without declaring that the
property is of the Seller, and the Buyer shall immediately inform the Seller by recorded
delivery letter with advice of receipt.
M.- FORCE MAJEURE
M.1. Each party may suspend the fulfilment of its contractual obligations, when the said
fulfilment is impossible or objectively too costly due to an unforeseeable impediment
independent from the parties, such as for example: strike, boycott, lockout, fire, war
(declared or not), civil war, riots and revolutions, requisitions, embargo, power blackouts,
extraordinary breakage of machinery, delays in the delivery of components or raw
materials.
M.2. The party that wishes to apply this clause shall immediately notify the onset and end
of the circumstances of force majeure to the other party in writing.
M.3. If the suspension due to force majeure lasts longer than 60 (sixty) days, each party
Technical Specifications
REV. 3 OF 1
ST
SEPTEMBER 2020
shall have the right to terminate this contract, with a notice of 10 (ten) days to be notified
to the counterparty in writing.
N.- CONFIDENTIALITY
N.1. The Buyer undertakes to maintain confidentiality as regards all information of a
technical (such as, by way of a non-limiting example, drawings, tables, documentation,
formulas and correspondence) and commercial nature (including contractual conditions,
purchase prices, payment conditions,...) gained during the performance of this contract.
N.2. The confidentiality obligation shall be undertaken for the entire duration of this
contract and for the period following its execution.
N.3. In case of failure to uphold the confidentiality obligation, the non-fulfilling party shall
pay the other party compensation for all damages that may derive therefrom.
O.- SELLER’S TRADEMARKS AND DISTINCTIVE SIGNS
O.1. The use of trademarks, ornamental designs and creative works in general, in
whatever form and manner of expression (such as, by way of a non-limiting example:
images, photos, drawings, videos, shapes, structures, etc.) constituting the Seller’s
intellectual property, through any means (such as, by way of a non-limiting example:
press, video, radio, internet, social media, instant messaging platforms or VoIP, etc.)
is strictly forbidden. Any exception to the said prohibition, even only partial, must be
authorised in writing, each time, by the Seller's general management.
P.- CONTRACT LANGUAGE, APPLICABLE LAW, JURISDICTION AND AUTHORITY
P.1. The present contract is drafted in Italian, and in case of disputes the said version shall
prevail over any translations in other languages.
P.2. Any dispute concerning the supply of products shall be subject to Italian law and
jurisdiction and the Court of Modena, the town in which the Seller has its registered
office, shall have sole local jurisdiction.
For more information refer to the General Conditions of Sale, available at
www.atlasconcorde.com
FR-DE-ES-RU
106
107
INDEX
PRODUCT
FINDER
SURFACE
RANGE
COMPANY
COLLECTIONS
TECHNICAL
SPECIFICATIONS
