La pressatura della giunzione tubo-raccordo è eseguita dai tecnici Eurotis. Inoltre,
i raccordi a pressare e-PRESS hanno superato accurati test, come i cicli termici per
impianti ad alte temperature (da 20° a 150°, pressione 30 bar, durata 10.000 cicli).
The tube-fitting joint is pressed by Eurotis. Moreover, E-press fittings have passed careful
tests, such as thermal cycles for high-temperature systems (from 20° to 150°, pressure 30
bar, duration 10,000 cycles).
La tenuta della giunzione (tubo/raccordo)
è
garantita da due punti di pressatura:
Il 1° punto deforma l’ingresso del raccordo
dove è presente un “dente” che, ad avvenuta
pressatura, blocca il tubo inserendosi nella gola
tra due corrugazioni impedendone lo sfilamento.
Il 2° punto deforma la guarnizione,
permettendone la penetrazione all’interno delle
corrugazioni del tubo PLT-CSST e garantendo
una tenuta sicura e duratura.
The mechanical tightness consists of two pressing
points:
The 1st point deforms the entry of the fitting
where there is a “tooth” which, after pressing,
blocks the tube inserting itself between
twocorrugation thus preventing the tube from
slipping out.
The 2nd point deforms the gasket, allowing
it to penetrate into the corrugations of the PLT-
CSST tube and ensuring a secure and lasting seal.
Sul tetto, dove spesso si incontrano le maggiori difficoltà nella preparazione al col-
legamento (taglio in misura della guaina e del tubo, accoppiamento tubo-raccordo),
soprattutto a causa delle disagevoli condizioni di lavoro, i raccordi pre-montati assi-
curano un’installazione facile e veloce. Con Solar-PRESS System l’unica operazione
necessaria è il collegamento del raccordo al pannello solare.
On the roof, where most difficulties are often encountered in preparing the connection
(cutting of the sheath and tube to size, tube-fitting coupling), above all due to the
uncomfortable working conditions, the pre-mounted fittings allow easy and fast
installation. With Solar-PRESS System, the only thing you need to do is connect the fitting
to the solar panel.
Codice
Code
DN
Tubo
Tube
m
Fil. connessione
Connection
thread
Raccordi a girello
già pressati al tubo
Swivel fitting
already pressed on tube
Num.
Pz./confez.
Pcs./pack.
Confez.
Pack.
A01-0001-07553
A01-0001-07554
15
10 m
3/4”
3/4”
2
2
1
1
15
15 m
1
1
A01-0001-07555
15
25 m
3/4”
2
1
1
A01-0001-07556
15
10 m
1”
2
1
1
A01-0001-07557
15
15 m
1”
2
1
1
A01-0001-07558
15
25 m
1”
2
1
1
A01-0001-07559
20
10 m
1”
2
1
1
A01-0001-07560
20
15 m
1”
2
1
1
A01-0001-07561
20
25 m
1”
2
1
1