82

83

To maintain the finished quality of your ANOUR

products, please follow bellow described cleaning

procedures. The instructions for the care and

maintenance are provided to you as a service.

No warranty is implied since results may vary.

Before cleaning, the light must be turned off and

unplugged from mains supply. While cleaning,

please be extremely careful.

POLISHED SURFACES

The product should only be treated with a polishing cream made for the

specific material. We recommend ©BRASSO.

BRUSHED SURFACES

For regular cleaning, the product should only be cleaned with a dry soft

cloth. To remove small scratches and scuff marks, you can firmly rub the

surface (in the same direction of the brushed finish) with the Green 3M

Scotch-Brite abrasive pad. You can also apply a polishing cream ©BRASSO

with a dry soft cloth.

BROWNED SURFACES & BLUED STEEL

The product should only be cleaned with a dry soft cloth. Only if required,

a thin coat of acid free natural oil can be applied on the surface and wiped

afterwards with a clean soft cloth.

RUSTED & OXIDIZED SURFACES

For regular cleaning, the product should only be cleaned with a feather

duster.

MARBLE

Dust frequently with a clean, soft cloth. Wash periodically with a cloth

dampened with warm water, and if necessary, a small amount of mild

dishwashing liquid. Use a second damp cloth to remove the soap.

STAINLESS STEEL

The product can be cleaned with stainless steel cleaner and a cloth. Dry

the lamp with a microfibre cloth after cleaning.

Please be careful with liquids around the touch dimmer and cable insulation

areas. For more information, consult the FAQ on anour.dk or contact us at

contact@anour.dk