TECHNICAL DETAILS

Arm Support 1961 provides assistance to those with limited strength and mobility. It increases the safety in areas of the bathroom – such a

s

by the wash basin, the toilet or in the shower. It provides support for standing or help in getting up. Optional and easy-to-mount additional

items for the arm support are also available such as a toilet roll holder, which is simply slid onto the arm, and cover caps for the backplate fo

r

when the arm is dismounted

.

- Compatible with Toilet Roll Holder 1962 and Cover Caps 1961-1.

- Made from type 304 stainless steel

.

- Concentric ends, no sharp edges and no visible fixings.

- Maximum weight capacity is 150 kg.

METHOD OF TESTIN

G

To ensure that the arm support is capable of withstanding heavy load and conditions for everyday use, the product has been tested

in accordance to the requirements of the European standard for technical aids for disabled, BS/EN 12182:2012. The arm support

was then subjected to static load; test with 150 kg, following by a static overload test with 225 kg. We recommend all FROST care

products are installed on a solid wall. Reinforcement should always be used if the wall is not stable. All tests are carried out o

n

products mounted on a solid wall. Reinforcements should always be used if the wall is not stable. This product has a maximum weigh

t

capacity of 150 kg. For safety reasons, we recommend to check all bolt connections to ensure that no parts are loose and that all

attachment to the wall are intact.

150 kg

Made from AISI 304 stainless stee

l

in the characteristic FROST

finishes

.

Optional Toilet Roll Holder which is simply slid onto the arm

Made from AISI 304 stainless steel in the characteristic FROST

finishes.

Optional Cover Caps for the backplate when the arm is dismounte

d

Made from AISI 304 stainless steel in the characteristic FROST finishes

.

100