Sono stati sottoposti a prova

tubi CSST e relativi raccordi di

Eurotis vincolati sia alla tavola

vibrante che a punti fissi in modo

da simulare un sisma di intensità

definita. Specificatamente sono

state effettuate prove sismiche

triassiali secondo la norma CEI

EN 60068-2-57 con tre accelero-

grammi (applicati nelle direzioni

orizzontali X e Y e verticale Z)

sintetizzati da spettri di riferi-

mento RRS ottenuti dalle Norme

Tecniche per le Costruzioni “NTC

2008”; in particolare si è fatto ri-

ferimento a due spettri (orizzon-

tale e verticale) ottenuti come

inviluppo di tutti i possibili suoli

per la località italiana a maggiore

accelerazione nominale (ZPA =

0,46 g = 4,5 m/s2) con un tempo

di ritorno di 975 anni.

Mediante la norma CEI EN 60654-

3 è possibile correlare l’intensità

sismica delle prove effettuate

con le scale Richter e Mercalli:

l’accelerazione cui le tubazioni

CSST di Eurotis sono state sotto-

poste senza presentare perdite o

rotture corrisponde ad un terremoto di magnitudo 8 della scala

Richter, paragonabile ad un’intensità tra la X e la XI della scala

Mercalli, ossia un terremoto classificabile tra “molto distrut-

tivo” (distruzione di molti edifici, frane e sollevamenti della

crosta terrestre, danni a dighe ed argini) e “catastrofico” (di-

struzione generale di edifici, rotaie piegate, distruzione di cavi

sotterranei e tubature).

Al termine di ogni prova è stato verificato il mantenimento

della tenuta delle tubazioni: per tutti i livelli di sollecitazione, e

anche al livello di eccitazione pari al 141% di quello già elevato

richiesto per la simulazione di un terremoto con un periodo di

ritorno di 975 anni, non si sono registrate né perdite né rotture

a significare l’ottimo comportamento sismico dei sistemi di tu-

bazioni corrugate formabili CSST di Eurotis.

Eurotis CSST tubes and related fit-

tings were tested constrained both to

the shaking table and to fixed points

in order to simulate an earthquake of

defined strength. Specifically seismic

tri-axial tests according to EN 60068-2-

57 standard were performed with three

accelerograms (applied in the horizontal

X and Y and vertical Z directions) syn-

thesized from the RRS reference spec-

tra obtained from the Italian “Norme

Tecniche per le Costruzioni - NTC 2008”

(the Italian national implementation of

the European Euro-codes); in particu-

lar reference was made to two spectra

(horizontal and vertical) obtained as the

envelope of all the possible soils for the

Italian location with the greater nominal

ground acceleration (ZPA = 0,46 g = 4,5

m/s2) with a return period of 975 years

(this Italian location has one of the seis-

mic hazard higher in all Europe).

Through the EN 60654-3 standard it is

possible to correlate the seismic in-

tensity of the performed tests with the

Richter and Mercalli scales: the acceler-

ation at which the CSST tubing of Euro-

tis were submitted without any leakage

or breakages corresponds to an earth-

quake measuring 8 on the Richter scale, comparable to an

intensity between X and XI of the Mercalli scale, that is an

earthquake that is classified among “very destructive” (de-

struction of many buildings, landslides and rifts in the Earth’s

crust, damage to dams and dikes) and “catastrophic” (gener-

al destruction of buildings, rails are bent, ground cables and

piping are destroyed).

After each test the maintenance of the leak-tightness of the

tubing was verified: for all the stress levels, and even at the

level of excitement equal to 141% than that already high re-

quired for the simulation of an earthquake with a return pe-

riod of 975 years, there were neither leakages nor breakages

to signify the excellent seismic behavior of the CSST pliable

corrugated tubing systems of Eurotis.

18 Sistemi Eurotis - Eurotis System