Pasting Guide

Step 1:

• Take the time to orientate

• Unpackage and unroll the wallpaper on a flat clean surface

• Pay attention to each panel number on top of every panel, this must follow

in sequence (panel 1,2,3,4 ect..)

Step 2:

• Your wall must be completely flat, clean and dry. Levels rough surfaces,

rough, holes and uneven spots.

• Your wall should be a uniform color. If not, you may notice differences

in color on your wall once installed. If your wall has multiple colors, we

recommend that you paint again.

• Make a vertical line with a plumb line on the left edge of the area you want to

cover with the mural. If you have a plumb, one can make your own by tying

a heavy object on the end of a rope. This line is very important because it is

the guide to start placing your mural.

Step 3:

• Applying glue on the wall evenly using a brush or a paint roller. Start

distributing from the line you marked as a guide to the plummet. Don’t

paste the entire wall, do it only in the area that will cover the first panel on

the left, leaving a few inches outside the right.

• Apply the first panel of the mural on the wall starting at the top left. Check

that is aligned with the guide.

• Press against the paper with a dry roller or sponge to remove any air

bubbles.

• Place the following panels in the same way in numerical order. The panels

must not be mounted on each other but are set on edge.

Step 4:

• Clean the excess glue with a damp sponge.

• With the help of a ruler and a cutter, adjust the sides and the top and bottom

of the wall if necessary.

• Let the wall dry for 24 hours; you will get a perfect final result

1

2

3

4

Panel 1

Panel 2

Panel 3 Panel 4 ...

WALL COVERING

...

WALL

WALL COVERING