SIMPLE-BEVEL

ACCESSORI

ACCESSORIES

“SIMPLE BEVEL” Macchina per smussi di precisione su piastrelle e lastre in gres porcellanato, marmo, granito, vetro. Scivolando in appoggio sul bordo della

piastrella, garantisce la uniformità dello smusso su tutta la lunghezza dello spigolo lavorato, copiando esattamente le curve fisiologiche della lastra; cosa che non

sarebbe possibile con una fresa guidata da una guida rigida. Smusso da 0<12 mm (0<6 mm gres porcellanato). Regolabile a qualsiasi angolazione da 22° a 90°. Il

TORO si ottiene con più passaggi ad angolazioni diverse. (r.6 nativo). Permette la rifinitura del bordo laterale della piastrella (max.30mm).

“SIMPLE BEVEL” Precision chamfer machine on gres porcelain tiles or Marble, Granite,Glass. Sliding resting on the edge of the tile, ensures the uniformity of the

bevel along the entire length of the edge worked, following exactly the physiological curves of the slab; which would not be possible with a cutter guided by a rigid

guide. Bevel from 0 to 12 mm ( from0 to 6mm on porcelain gres)

Adjustable to any angle from 22 ° to 90 °. The BULL is obtained with multiple passes at different angles. (r. 6 native). Allows finishing of the lateral edge of the

tile (max.30mm)..

Accessori consigliati per la lavorazione delle lastre:

Recommended accessories for processing on large tiles:

Piastrella smussata.

Beveled tile.

Inizio

Beginning

JOLLY su una lastra di 3 mm.

JOLLY on a 3mm tile.

Fine

End

Mole diamantate con velcro disponibili in diverse grane:

50 sgrossatura - 200 finitura - 800 semi-lucidatura

1500 lucidatura.

Diamond grinding wheels with velcro available in different

grits: 50 roughing - 200 finishing - 800 semi-polishing

1500 polishing.

Art. 41D

Separatore per piastrelle pre-incise,

consigliato per spessori > di 8 mm.

Separator for pre-scored tiles,

recommended for thicknesses bigger

than 8 mm.

Platorello con velcro.

Pad with velcro.

Mola diamantata.

Diamond grinding wheel.

Attacco universale M14-5/8 11 UNC

Universal attachment M14 or 5/8-11 UNC.

Per la spalmatura dell’adesivo

sul retro della lastra si consiglia

l’utilizzo di una spatola a denti

quadri 4x4 mm

For thinset coverage on the back of

the tile is recommended the use of

4x4 mm notch trowel.

Per la spalmatura dell’adesivo sul

supporto si consiglia la spatola

“NO-AIR” che è specificatamente

progettata.

For thinset coverage on the back

of the support is recommended

the use of “NO-AIR” trowel that is

specifically designed.

Piano d’appoggio fresato per la massima precisione, in

materiale Anti-frizione.

Sliding surface milled for the maximum precision, in

Anti-friction material.

Art. 75C3

Disco corona continua ø

115 per spessori da 3 a

12 mm.

Continuous crown disc ø

115 for thicknesses from

3 to 12 mm.

Art. 72D

Platorello con velcro.

Pad with velcro.

Art. 72H1

Tampone diamantato grana

120 per finitura a mano.

120 grit diamond pad for hand

finishing.

Art. 72F..

Mola Diamantata

Lamellare grana 60/120

Ø 115 mm, foro 22,2

(100 lamelle).

Lamellar Diamond Grinding

Wheels, 60/120 grit,

Ø 115mm hole 22.2,

(100 flap).

Attacco universale di aspirazione.

Universal vacuum cleaner attachment.

Art. 51G

Il Gruppo ventose MOVE è indispensabile per

il corretto avvicinamento delle lastre di grande

formato grazie alle quattro ventose antimac-

chia , a forte tenuta, anche su materiali ruvidi.

The MOVE suction cups is indispensable for

the correct approach of the large format tiles,

thanks to the four strong stain-free suction

cups adherents also on rough materials.

Art. 75E

Disco diamantato a lunga

durata per taglio e molatura

Ø 115mm foro 22,2 mm,

spessore 1,7

Long life diamond disc

for cutting and grinding

Ø 115mm hole 22.2 mm,

thick 1.7 mm

Frattazzo Battipiastrelle

16x33 cm, specifico per la

corretta espulsione dell’aria

da sotto la piastrella.

Beat Tile Trowel 16x33 cm,

specific for the correct expul-

sion of air from under the tile.

Art. 42E

INSTRUCTION

Regolazione

dell’inclinazione di

lavorazione.

Adjustment of

inclination of profiling.

Art. 49E

Art. 49H

Frese diamantate attacco M14

Diamond drill bits with Threaded M14 attachment

Frese diamantate per forature a secco o ad acqua su Gres Porcellanato, Marmo, Granito, ecc..

Attacco filettato M14 .

Diamond drill bit for dry or wet drilling on Gres Porcelain tile, Marble, Granite, etc. .. Hexago-

nal attach threaded M14 .

Art. 72E..

36A5D The machine is

suitable for the following

processes:

Finishing and polishing of

lateral edge on tiles, cut

with blade. 2 to 30mm thick

tiles. Machining at 90°.

Using grinding wheel art.

72E0200/-0800/-1500

Bevel , finishing and polishing

of tiles edge, cut with blade.

Angle 22°÷90°. Back miter

width 1÷4mm, on gres

porcelain material, Using

grinding wheel art.

72E0050/-0200/-0800/

1500

Finishing and polishing

of tiles edge, previously

chamfered with blade. Angle

22°÷90°.

Chamfer width: 1÷18mm

on gres porcelain material.

Using grinding wheel art.

72E0200/-0800/-1500

W

E

B

S

I

T

E

1

2

18

19