Laying and Maintenance Tips

Technical Features

use

installation

recommended adhesive

cleaning at the end

of installation

general cleaning

(installed tiles)

calibers (real size)

Wall – indoor

For an even, smooth shading effect when laying, alternate material from several different boxes.

For the correct installation sequence, follow the video with the assembly instructions and use the appropriate tool,

checking correct alignment with laser level.

Heat glue and silicone or other structural adhesive (as shown in the video).

SILICONE: Solvent for silicone e.g. FILA ZERO SIL. Put it straight onto the stain, wait for 20 minutes and remove the mark

using scotch brite.

PAINT: Can usually be removed using water, but if resin-based paints or particular enamels have been used, it is best

to ask the manufacturer which solvent is most suitable.

RUST: stain remover es. FILA NO RUST. Apply the product onto the stain, leave for 15 minutes, remove the residue and

rinse thoroughly.

You are recommended to use specific detergent for porcelain stoneware diluted in water.

For routine maintenance, do not use acidic or alkaline detergents/products.

The caliber depends on the production batch, it is recommended to ask in advance.

STANDARD

ISO 10545/3

ISO 10545/13

ISO 10545/14

Leed Certification 4.1

VOC Emission

Declaration of Contents

SVHC declaration

Packing

SIZE

ADAGIO

FEATURES

water absorption

resistance to acids and alkalis

(low and high concentration)

resistance to household cleaning agents

and swimming pool chemicals

VALUE REQUIRED

> 10%

declared value

minimum class B

minimum class 3

ADAGIO

A/B

A/B

5

64% recycled material

available upon request

available upon request

available upon request

stains resistance

PCS·SQM

56

PCS·BOX

10

SQM·BOX

0,18

BOX·PAL

56

KG·BOX

2,30

KG·PAL

128,80

SQM·PAL

10,08

48

49