Product range HeatBloC®

Heating circuits DN 25

All HeatBloC®s offer

the following advantages:

Preassembled group of fittings for heating circuits

High flexibility during assembly

modules can be combined as required

Full port ball valve, gaskets of the spindle can be replaced during

operation

Flat-sealing connections 11⁄2'' external thread

with 11⁄2" union nut for assembly on PAW distribution manifolds

with PAW mounting equipment, the HeatBloCs can be installed on wall

brackets

Large ball valve handles,

easy handling, visible closing position

EnEV-compliant functional insulation made of permanently elastic

EPP, complete insulation of the valves and fittings with sealing lips,

ventilation opening to cool the pump

Free access to the pump head

Check valve in the return pipe

can be opened, 200 mm wc, spring-loaded, thus suited for horizontal and

overhead installation

Flow right = standard

The HeatBloC®s can be delivered with flow on the left against additional

charge.

Flow and return line can be changed on site,

also for heating circuits with mixing valve

All water-carrying parts are made of brass

Full metal thermometers

can be pulled off, with immersion sleeve integrated in the ball valve

PAW heating pumps with high-efficiency (ECM) technology

fitted with 2 m cable, completely premounted, integrated in the

insulation, pressure tested, with serial number, perfectly designed system,

pump characteristics, EuP/ErP READY

Pump can be isolated,

so that it can be replaced without draining

As of page 117, you will find the complete mounting equipment for the

modular system DN 25.

D

N

2

5

01/2020 • Printed in Germany

104

PAW GmbH & Co. KG • 31789 Hameln • Germany • Phone: +49-5151-9856-0 • Fax: +49-5151-9856-98 • info@paw.eu • www.paw.eu