Paw - 01/2020

Illustration

Item no.

€ / piece

Wall bracket DN 25 - DN 32

34723

Galvanised mounting bracket for wall assembly of HeatBloCs.

Mount HeatBloCs on mounting bracket for an easy assembly.

Wall bracket for HeatBloC DN 25 - DN 32

34722

Components: Wall bracket (Steel, galvanised), Mounting equipment

DN 25: Possible wall distance = 150 mm

DN 32: Possible wall distance = 180 mm

Not required for installation with a PAW modular distribution manifold

Wall bracket set for modular distribution manifold

34721

Components: 2 wall brackets as a set, , Mounting equipment DN 25: Possible wall distance:

150 mm DN 32: Possible wall distance: 180 mm From 5-fold modular distribution manifolds

on, we recommend to use 2 wall bracket sets.

Wall bracket set DN 25

3422SET

Components: 2 x nut 11⁄2", Mounting plate, Wall bracket

Possible cetre distance: 87.5-162.5 mm

Immersion sleeve 6 mm x 30 mm

566001

Immersion sleeve 6 mm x 60 mm

566002

Immersion sleeve 6 mm x 60 mm

5660021

Immersion sleeve 6 mm x 100 mm

566003

Immersion sleeve 6 mm x 150 mm

566004

for the installation of temperature sensors (d = 6 mm) in the storage tank, in the collector

and the hydraulic separator.

Attention: suitable for ball valves until 2016!

566001: self-sealing with, o-ring, polished brass, for sensor, T = 30 mm

566002: standard, chromed brass, for sensor, T = 60 mm

5660021: standard, chromed brass, with valve extension (25 mm), for sensor, T = 60 mm

566003: standard, chromed copper, for sensor, T = 100 mm

566004: standard, chromed copper, for sensor, T = 150 mm

Cutting-ring compression fitting DN 25 d = 15 mm

562915

Cutting-ring compression fitting DN 25 d = 18 mm

562918

Cutting-ring compression fitting DN 25 d = 22 mm

562922

1" external thread, self-sealing with o-ring, with support sleeve, suitable for soft copper pipes.

Usable up to 150 °C.

Connection set DN 25 - 2x 1" internal thread

3431

Connection set DN 25 - 11⁄2" external thread x 1" internal thread

Consisting of 2 insertion pieces for connection of pipes with 1" external thread below

HeatBloCs or for the use of cutting-ring compression fittings and cutting ring fitting.

3432

Flush and drain set DN 25

3461

2 x counter-T-pieces with fill and drain valve, each equipped with an extension piece, permits

to flush and drain individual HeatBloCs.

Prices excl. VAT • 01/2020 • Printed in Germany

PAW GmbH & Co. KG • 31789 Hameln • Germany • Phone: +49-5151-9856-0 • Fax: +49-5151-9856-98 • info@paw.eu • www.paw.eu

123