Product range HeatBloC®

Heating circuits DN 40/50

All HeatBloC®s offer

the following advantages:

Preassembled group of fittings for heating circuits

High flexibility during assembly

modules can be combined as required

Full port ball valve, gaskets of the spindle can be replaced during

operation

Connections

Flange connection DN 40/PN 6 or DN 50/PN6 as slip-on flange and 11⁄2'' /

2'' internal thread

incl. gaskets and screws for the installation on PAW modular distribution

manifolds

With PAW mounting equipment, the HeatBloCs can be installed on wall

brackets.

Hand lever at the ball valve

easy handling from the front, even when the insulation is closed,

visible closing position

EnEV conform functional insulation

made of durable elastic EPP, complete insulation of valves and fittings,

ventilation opening to cool the pump

Free access to the pump head

Check valve in the return pipe

can be opened, 200 mm wc, spring-loaded, thus suited for horizontal and

overhead installation

Flow right = standard

The HeatBloC®s can be delivered with flow on the left against

additional charge.

Flow and return line can be changed on site,

also for heating circuits with mixing valve

Fill and drain valve

for flushing, filling and draining, integrated in the ball valve

Full metal thermometers

can be pulled off, with immersion sleeve integrated in the ball valve

PAW heating pumps with high-efficiency (ECM) technology

fitted with cable, completely premounted, integrated in the insulation,

pressure tested, with serial number, perfectly designed system, pump

characteristics, EuP/ErP READY

Pump can be isolated,

so that it can be replaced without draining

You will find the complete mounting equipment for the modular system

DN 40 at page 171, for the modular system DN 50 at page 173.

D

N

4

0

01/2020 • Printed in Germany

148

PAW GmbH & Co. KG • 31789 Hameln • Germany • Phone: +49-5151-9856-0 • Fax: +49-5151-9856-98 • info@paw.eu • www.paw.eu