Technical
Features
General Information
collection
design
production
material
nominal sizes
specification
category
7
22,5
complementary pieces
linear profile 300
linear profile 300
Hives
Konstantin Grcic, 2022
Artisanal
Extruded terracotta
13·22,5·7 cm (5”·9”·3”)
– Artisanal extruded partition elements, 7cm thick. Natural (natural finishing)
– It is possible to install Hives both horizontally and vertically.
– For aesthetic outcome it is possible to install Hives using our wooden profile. The profile is painted and suitable for outdoor use.
A top profile with removable sides is provided for ceiling fixing.
– This product is suitable for both residential and commercial areas, to be installed in walls with height of 4mt. These elements must
in any case comply with the technical standards of construction regulation, applicable in the country where they are installed.
– For the Italian national territory, in particular, they should comply with standard NTC 2018 DECRETO MIN 27/01.
– As complementary pieces Mutina provide the Mutina sealant, EC 1 plus for VOC emissions.
For installation process see the installation video available on www.mutina.it for Celosia
Hives is suitable for indoor and outdoor areas complying with UNI EN 772-22 marked “F1- moderate exposure”.
UNI 11128/2004
13
colors
Natural
At the base of laying scheme A
and B, place a piece obtained
by cutting Hives bricks in half on
the long side
top profile 300
section
1
1
1,4
4
9,5
use
installation
cleaning at the end
of installation
calibers (real size)
Wall – indoor, outdoor.
For installation process see the installation video available on www.mutina.it
Avoid drippings during installation. If needed the excess can be removed after the product has dried,
using a tool with a sharp edge.
22,5 x 13,1 x 7 cm with 1-3 mm tolerance (artisanal product)
To make the installation of these items
easier, a Mutina sealant is now available:
an organic and eco-friendly sealing
material, which is sold separately.
Laying and maintenance tips
27
