SOLUZIONI SPECIALI

SPECIAL SOLUTIONS

Tagli a misura

1 Sono previsti tagli a misura in altezza su

pannellature e profili con cremagliera.

Le pannellature possono essere ridotte

anche in larghezza e per mansardato.

Soluzione mansardato non realizzabile

con pannellatura schienale in vetro.

Fascia aggiustaggio terminale

2 Fascia di aggiustaggio terminale a muro

in sostituzione al profilo laterale.

Fascia larghezza mm 300 riducibile fino

a minimo mm 60.

Soluzione angolare lineare

3 Si possono realizzare composizioni

ad angolo con attrezzatura lineare, sia

nella versione Ubik con pannellatura

a muro che con profili. Per la versione

pannellatura a muro si deve prevedere

uno schienale angolare con un pannello

fuori misura (mm 545 o 400).

Angolo maggiore di 90°

4 Profilo terminale speciale sx o dx

larghezza da mm 52 a 300 e profondità

mm 150 riducibile fino a mm 60

da utilizzare per angolazioni muro

superiori a 90° (per cabine armadio con

pannellatura). L’elemento angolare può

essere attrezzato con ripiani (escluso

ripiani vetro) e tubi appendiabiti.

Angolo fuorisquadra

5 Profilo per angoli fuorisquadra (per

cabine armadio con pannellatura o con

profili con cremagliera).

È previsto il taglio a misura per gli

elementi che compongono l’angolo

fuorisquadra: ripiani e basamento.

Custom cuts

1 Custom cuts in height for back panels

and profiles with racks are possible.

The back panels can be customized also

in width and for mansard. Customization

for mansard not available for back panel

in glass.

Adjusting filler

2 Initial or ending adjusting filler to be used

instead of the lateral profile.

Adjusting filler width 11 3/4” can be cut to

minimum 2 1/4”.

Linear corner solution

3 It is possible to realize corner

compositions with linear equipment both

in Ubik version with back panels and with

profiles. In the Ubik version with back

panels, a corner back panel with non

standard panel ( 21 1/2” or 15 3/4”) must

be foreseen.

Corner larger than 90°

4 Special right or left profile width from

2” to 11 3/4” and depth 6” can be cut till

2 1/4” to be used for wall corners larger

than 90° (for walk-in closet with back

panels). Corner element can be equipped

with shelves (except glass shelves) and

hanging rails.

Out of square corner

5 Profile for out of square corners (for

walk-in closets with back panels or with

profile with rack).

Cut to measure is foreseen for elements

that compose the out of square corner:

shelves and bases.

1

2

3

4

3

4

5

5

3 Soluzione angolare con

attrezzatura lineare

Corner solution with linear

equipment

4 Angolo maggiore di 90°

Corner larger than 90°

5 Angoli fuorisquadra: angolo

minimo 85°, angolo massimo

100°

Out of square corner: minimum

corner 85°, maximum corner

100°

UBIK

STRUCTURE

196

NIGHT SYSTEMS TECHNICAL

197