GQG

60 Hz

Construction

Submersible pumps with high power grinder, with horizontal flanged

and threaded delivery port (DN 32 PN 6 - G 1 1/2).

Connections: threaded ports ISO 228/1.

threaded ports NPT (ANSI/ASME B1.20.1) on request

Double mechanical shaft seal with interposed oil chamber, to protect

against dry-running.

Applications

Suitable for pumping waste water containing long filamentous, paper

and textile materials and organics.

They are particularly suitable for use in domestic, residential and industrial

installations.

Solid passage Ø 6 mm

Operating conditions

Liquid temperature +5 °C to +35° C.

Maximum immersion depth: 5 m.

Minimum immersion depth: 300 mm.

Continuous duty (with submerged motor).

Motor

2-pole induction motor, 60 Hz (n ≈ 3450 rpm).

GQG: three-phase 220 V;

three-phase 380 V;

three-phase 440 V;.

GQGM:single-phase 220 V,

with float switch, overcurrent protection and control box with starting

capacitors.

Cable: length 10 m.

Insulation class F.

Protection IP X8 (for continuous immersion)

Triple impregnation humidity-proof dry winding.

Constructed in accordance with: EN 60034-1;

EN 60335-1, EN 60335-2-41.

Other features on request

- Other voltages.

- Other mechanical seal.

- Cable length 20 m.

- Vertical magnetic float switch.

- Three-phase pumps with incorporated float switch.

Ejecución

Bombas sumergibles con sistema triturador de alto poder cortante, con

una salida de descarga horizontal rosca G 1 1/2” con bridas DN 32.

Orificios: Roscados ISO 228/1.

Roscados NPT (ANSI/ASME B1.20.1) bajo demanda.

Sello del eje doble con cámara de aceite interpuesta, protegida contra el

funcionamiento en seco.

Aplicaciones

Para manejar el agua que contiene materiales fibrosos largos,

materiales de papel o textil.

Son especialmente adecuados para la disposición de aguas

residuales de uso doméstico, residencial e industrial.

Paso de sólidos 6 mm.

Límites de empleo

Temperatura del líquido +5 °C a +35 ° C.

Profundidad de inmersión máxima: 5 m.

Profundidad de inmersión mínima de 300 mm.

Servicio continuo (con motor sumergible).

Motor

Motor a inducción 2 polos, 60 Hz (n ≈ 3450 1/min).

Materials

Component

Pump casing

Impeller

Casing cover

Rotating cutting blade

Fixed cutting blade

Motor jacket

Jacket cover

Handle

Shaft

Mechanical seal: upper

Mechanical seal: lower

Seal lubrication oil

Material

Cast iron GJL 200 EN 1561

Nì-Mo steel 1.4125 EN 10088 (AISI 440C)

Cr-Nì steel 1.4301 EN 10088 (AISI 304)

Polypropylene (with frame in AISI 304)

Cr-Nì steel 1.4305 EN 10088 (AISI 303)

Ceramic alumina/Carbon/NBR

Oil for food/pharmaceutical machinery

Materiales

Componentes

Cuerpo bomba

Rodete

Tapa del cuerpo

Cuchilla rotante

Cuchilla fija

Camisa motor

Tapa camisa

Asa transporte

Eje

Sello mecánico: superior

Sello mecánico: inferior

Aceite lubrif. sello

Material

Hierro GJL 200 EN 1561

Acero al Cr-Mo 1.4125 EN 10088 (AISI 440C)

Acero al Cr-Ní 1.4301 EN 10088 (AISI 304)

Polipropileno (con un núcleo de AISI 304)

Acero al Cr-Ní 1.4305 EN 10088 (AISI 303)

Cerámica alúmina/Carbón/NBR

Aceite blanco para uso alimentario farmacéutico

GQG:

GQGM:

trifásico 220 V;

trifásico 380 V;

trifásico 440 V.

monofásico 220 V,

con interruptor de flotador, protección de sobrecurriente y el

panel de control con condensadores de partida.

Cavo: longitud 10 m.

Aislamiento clase F.

Protección IP X8 (para inmersión continua).

Bobinado en seco con triple impregnación resistente a la humedad.

Ejecución según: EN 60034-1;

EN 60335-1, EN 60335-2-41.

Otras ejecuciones bajo demanda

- Otras tensiones.

- Otro sello mecánico.

- Longitud del cable 20 m.

- Con interruptor de flotador fijo (magnético).

- Bombas trifásicas con interruptor de flotador incorporado.

289