NCE EI

60 Hz

Operating modes

PROPORTIONAL CURVE PROGRAMMING Δp-v

(GREEN LED)

Moving the switch to 1 or 2 setting, the pump operates with the proportional curve.

This mode ensures maximum energy efficiency.

CONSTANT CURVE PROGRAMMING Δp-c

(ORANGE LED)

Moving the switch to I or II setting, the pump operates with a constant curve according to the

selected flow rates.

min

min

max

max

MANUAL PROGRAMMING

(BLUE LED)

Setting the switch in any position between the MIN and MAX points, the most suitable operating curve

for the installation is manually selected.

min

max

WARNING!

- The red LED indicates that the pump is not rotating but is still under tension.

- White flashing LED : plant degassing requirement, air in the system.

Modo de funcionamiento

PROGRAMA CURVA PROPORCIONAL Δp-v

(LED VERDE)

Al mover el interruptor a la posición 1 o 2, la bomba produce una curva de rendimiento proporcional.

Esta operación garantiza la máxima eficiencia energética.

min

max

PPROGRAMA CURVA COSTANTE Δp-c

(LED NARANJA)

Al mover el interruptor a la posición I o II, la bomba produce una curva de rendimiento constante a la

variación del caudal.

min

max

PROGRAMA MANUAL

(LED AZUL)

Mover el interruptor en cualquier lugar entre MIN y MAX, es posible seleccionar manualmente la

curva de trabajo más adecuada a la maquinaria.

406

min

max

ATENCIÓN!

- Led rojo:la bomba está en un estado bloqueado, pero es todavía bajo tensión.

- Led blanco con intermitencia: se necesita desgasificar la planta, aire en el sistema.