Calpeda - 60Hz

Materials

Component

Pump casing

Casing cover

Pump Shaft

Suction casing

Stage casing

Impeller

Membrane

Tank cover

Membrane cap

Non-return valve

Plug

Mechanical seal

Material

Cr-Ni steel 1.4301 EN 10088 (AISI 304)

Cr-Ni steel 1.4305 EN 10088 (AISI 303)

PPO-GF20 (Noryl)

PPO-GF20 (Noryl) (AISI 304 for MÈTA SMALL)

Cr-Ni steel 1.4301 EN 10088 (AISI 304)

Butyl

POM - POLYACETAL

Cr-Ni steel 1.4305 EN 10088 (AISI 303)

Carbon - Ceramic - NBR

Variable speed pressure boosting

system with integrated control

products

Construction

Self-priming booster set with built in frequency converter.

MÈTA is a plug and play solution, the pump is equipped with an

integrated pressure transducer, an integrated check valve and a

built-in pressure vessel.

The VSD controls the start and stop of the pump and allows to

keep a constant pressure.

Boosting sets with 2 pumps

Suction and delivery manifolds in stainless steel AISI 304.

Connections are located on the delivery manifold for the

installation of one vessel G1 connection.

Applications

For water supply.

For domestic use, for garden use and irrigation.

Features

• integrated frequency converter

• built-in pressure vessel

• high efficiency asynchronous motor

• motor power control

• programmable re-start pressure

• no hydraulic losses due to the measuring devices

• voltage and current control

• monitoring of maximum starting current

Protections

• dry-run protection

• detects the presence of air in the pump casing

• overload control and overheating motor control

• pump blockage

• power supply control

• starts per hour control

• detects small leakages in the system

Operating conditions

Liquid temperature: 0 °C to +35 °C.

Ambient temperature up to +40 °C.

Maximum permissible pressure in the pump casing: 8 bar.

Continuous duty.

Motor

2-pole induction motor.

Nominal speed 4500 rpm (5800 rpm per MÈTA SMALL)

Motor: variable speed

Frequency: 50 Hz

Single-phase 220-240V~50Hz/220V~60Hz, with thermal protector.

Cable: H07RN8-F, 3G1,5 mm2, length 1,5 m, with plug

CEIUNEL 47166.

Insulation class F.

Protection IP X4.

Constructed in accordance with: EN 60034-1;

EN 60335-1, EN 60335-2-41.

EASY TO INSTALL

Plug And Play solution

ECONOMIC SAVING

High efficiency asynchronous motor

EASY TO USE

Equipped with a programmable software and, thanks to the

analogic pressure sensor, the product allows to set the restart

pressure.