È possibile piegare manualmente il tubo PLT-CSST senza l’utilizzo di spe-
cifici strumenti, grazie alla particolare morfologia delle corrugazioni ed
a uno spessore minimo di 0,3 mm.
The PLT-CSST tube can be worked and bent manually without the use of
specific tools, thanks to the particular corrugations morphology and the mi-
nimum thickness of 0.3 mm.
La tenuta della giunzione (tubo/raccordo) è garantita da due punti di
pressatura:
il 1° punto deforma l’ingresso del raccordo dove è presente un “den-
te” che, ad avvenuta pressatura, blocca il tubo inserendosi nella gola tra
due corrugazioni impedendone lo sfilamento.
il 2° punto di pressatura deforma la guarnizione, permettendone la pe-
netrazione all’interno delle corrugazioni del tubo PLT-CSST e garanten-
do una tenuta sicura e duratura.
The mechanical tightness consists of two pressing points:
the 1st point deforms the entry of the
fitting where there is a “tooth” which,
after pressing, blocks the tube inserting itself between twocorrugation thus
preventing the tube from slipping out.
the 2nd point deforms the gasket permitting its penetration inside the PLT-
CSST tube corrugations and guaranteeing a safe and durable tightness