C
A
B
CARBON BLOCK WITH HOLLOW FIBRES WITH DOUBLE O-RING COLLAR 45 MM
CA-SE HF carbon block
and hollow fibre membranes
carbon block
CA-SE HF
and hollow-fibre membranes
Micro-filtration
sediments, removal of microbes, reduction of:
chlorine, taste, odour (CTO); volatile organic compounds
(VOC); heavy metals (Pb models).
Average life-span: 3-6 months.
Maintenance: none.
Remark - Use a pre-filter to protect the cartridge.
WORKING CONDITIONS
Max working temperature ______45°C (113°F)
Min working temperature _______4°C (39,2°F)
SPECIFICATIONS
Non-toxic materials, suitable for drinking water.
Filter and treatment medium: sintered block of
activated carbon powder.
Micro and Ultra-filtration membranes: polyethersulphone
(PES), HF tube high impact polystyrene (HIPS).
End caps: polypropylene.
O-rings BX: EPDM.
and Ultra-filtration of fine
Activated carbon block made from coconut shell, providing fine sediment filtration and reduction of chlorine, taste, odour (CTO) and volatile organic
compounds (VOC) provided with hollow-fibre membrane module for Micro-filtration at 0.15 micron or Ultra-filtration at 0.02 micron. CA-SE HF models at
0.15 micron remove the finest sediments and major part of harmful Bacteria (E. coli, Salmonella, V.cholerae, Legionella, Pseudomonas) and protozoan
Cysts (Giardia, Crysptosporidium). CA-SE HF-U models at 0.02 micron remove Bacteria and Virus. All CA-SE HF models are available with height 10”.
CA-SE HF cartridges are available in a variety of:
CONFIGURATIONS:
- BX proprietary configuration with double o-ring
collar 45 mm, suitable to PLUS 3P BX
housings, DP housings, K DP housings.
MODELS:
- CA-SE HF series 10” to 10” OD 2.40” ID 1.10”,
BX configurations.
CERTIFICATIONS
CA-SE HF cartridges are tested and certified under the most
stringent procedures worldwide, in compliance with DM
25 (Italy), with the sanitary certification EAC/
Ghostreghistrazia (Russia) and WaterMark (Australia).
FLOW RATE vs PRESSURE DROP Δp
Tests carried on 10” elements type CA SE HF-U 10 SX.
Testing mode: 20°C, 3 BAR
2,5
2
1,5
1
0,5
0
0,02 micron
0,15 micron
266 | water treatment filter cartridges
CA-SE HF BX
CARBON BLOCK WITH HOLLOW FIBRES WITH DOUBLE O-RING COLLAR 45 MM
COD
E
MODEL
NOMINA
L
NOMINA
L
RECOMMENDE
D
DIMENSIONSMM
OD 2,40” x ID 1,10”
RE5375530 CA-SE 10 HF-U BX 0,02 mcr
RE5375520 CA-SE 10 HF BX 0,15 mcr
CA-SE HF Pb BX
HEIGHT FILTRATION
MICRON
10”
0,02
10”
0,15
FLOW RATE l/h
A
B
C
100
248
67
25
400
248
67
25
COD
E
MODEL
NOMINA
L
NOMINA
L
RECOMMENDE
D
DIMENSIONSMM
RE5375550
RE5375540
OD 2,40” x ID 1,10”
CA-SE 10 HF-U Pb BX 0,02 mcr
CA-SE 10 HF Pb BX 0,15 mcr
HEIGHT FILTRATION
MICRON
10”
0,02
10”
0,15
FLOW RATE l/h
A
B
C
100
248
67
25
400
248
67
25
The inner “Ster-O-Tap
®
” element (NSF 42 and 53 listed) with “hollow-fibre” capillary
membranes is made in 2 models to provide Micro-filtration at 0.15 micron (tested
against Brevimundimonas (Pseudomonas) diminuta) or Ultra-filtration at 0.02 micron.
The hollow fibre membranes element is designed to provide a very large contact
surface, resulting in high water flow and low pressure drop at stated filter rates.
0
1000
Flow rate [l/h]
2000
Δ
p
[
b
a
r
]
