L

O

W

T

H

I

C

K

N

E

S

S

P

A

N

E

L

S

Pannello termoformato a spessore ridotto

Thermoformed panel with reduced thickness

VARMO TECK 23

è il pannello radiante per impianti di

riscaldamento e raffrescamento a pavimento studiato per

le ristrutturazioni quando si hanno problemi di altezze a

disposizione.

E’ realizzato in polistirene espanso sinterizzato EPS

bianco, accoppiato con un film termoformato nero in

polistirene laminato HIPS con spessore pari a 650 μm,

utilizzabile con tubi di diametro 16 e 17 mm.

E’ marcato CE ed è idoneo a sistemi radianti alimentati ad

acqua per il riscaldamento ed il raffrescamento integrati

nelle strutture secondo le norme UNI EN 1264.

Abbinato a massetto autolivellante, consente di realizzare

un nuovo impianto in soli 3-4 cm a differenza dei sistemi

tradizionali che ne richiedono almeno 8-9 cm.

Può essere utilizzato in ambienti pubblici e privati, in

luoghi asciutti e in ambienti a rischio di umidità, come

bagni e cucine.

Se si utilizza abbinato ad un massetto autolivellante, ha

un'inerzia molto bassa, il che permette una

termoregolazione molto precisa e una messa a regime

veloce, con il conseguente risparmio nei costi di esercizio

per il minor consumo energetico.

Raccomandazioni: il pannello deve essere sempre

protetto dalla luce solare diretta e immagazzinato in luogo

asciutto, arieggiato, lontano da fonti di calore e fiamme

libere.

VARMO TECK 23 is the radiant panel for underfloor heating

and cooling systems designed for renovations when there

are height problems to fit a traditional underfloor system.

It is made of white EPS sintered expanded polystyrene,

laminated with a black HIPS thermoformed polystyrene

laminate film with a thickness of 650 μm, which can be

used with 16 and 17 mm diameter pipes.

It complies with the regulations in force regarding thermal

insulation and with UNI EN 13163 of 2009 and UNI EN

1264-4 standards; it has CE marking.

Combined with a self-levelling screed, it allows a new

system to be created in just 3-4 cm, unlike traditional

systems that require at least 8-9 cm.

It can be used in public and private environments, in dry

places and in environments with a risk of humidity, such as

bathrooms and kitchens.

If a self-levelling screed is used, VARMO TECK has a very

low inertia, which allows very precise thermoregulation and

fast set-up, resulting in savings in operating costs due to

lower energy consumption.

Recommendations: the panel must always be protected

from direct sunlight and stored in a dry, ventilated place,

away from heat sources and open flames.

60