Description
Mile Bollard
Collection of outdoor bollards with a rigorous, minimal
design and LED light source that can be combined with wall
versions.
Uni- or bi-directional bollard version, available in two heights
and widths, based on light source and power requirements.
The rigid frame is made of extruded aluminum with no visible
screws, and the base rises above the ground for a quick,
simple installation. The head anchoring hardware is made of
AISI 316L stainless steel.
Available in various finishes with a double layer of powder
coating and chemical conversion treatment to protect it
against corrosion.
The diffuser is made of transparent, UV-stabilized polycar-
bonate.
The asymmetric reflecting screen is made of pure, oxidized
and polished aluminum, with LED source in a rear position
to reduce direct glare. The downward, asymmetric light
emission ensures the luminaire’s compliance with existing
light pollution laws.
Bollard versions may be easily installed on any flooring on the
ground with anchors, or with the dedicated anchoring plate
accessory to completely integrate the base of the product
with the pavement.
Mile Path
Collection of outdoor wall luminaires with a rigorous, minimal
design and LED light source that can be combined with wall
and bollard versions.
Available in two sizes and various finishes with a double layer
of powder coating.
Primer version to be painted after installation with regular
water-based colors (tempera, stucco, water-based paints) to
ensure flawless integration with the building.
The anchoring hardware is made of AISI 316L stainless steel.
Diffuser is made of transparent, UV-stabilized polycarbonate.
The asymmetric, reflecting screen is made of aluminum pain-
ted in black to reduce direct glare from re
flections. It holds
the LED source in a rear position. The downward, asymme-
tric light emission ensures the luminaire’s compliance with
existing light pollution laws.
Wall mounting bracket included.
Mile Wall
Complete family of wall luminaires with a rigorous, minimal
design with LED light source, a design characterized by a
die-cast aluminum trim with very low copper content and
good mechanical features combined with good resistance
against corrosion thanks to the surface chemical conversion
treatment.
Available in two sizes and various finishes with a double layer
of powder coating.
Primer version to be painted after installation with regular
water-based colors (tempera, stucco, water-based paints) to
ensure flawless integration with the building.
The anchoring hardware is made of AISI 316L stainless steel.
The diffuser is perfectly flush with the decorative band and is
made of transparent, UV-stabilized polycarbonate.
The asymmetric, reflecting screen is made of pure, oxidized
and polished aluminum, with LED source in a rear position to
reduce direct glare.
Its asymmetrical optical unit is designed to ensure a wide
range of lighting features and flexible use in different ar-
chitectural settings. Single-emission version directing light
upwards or downwards and dual-emission version available.
Each version is available in two different lighting solutions:
wall-washer lighting or asymmetric lighting. For instance, by
using the version with light directed upwards in porticos or
entrance halls, the ceiling itself becomes a diffuser, offering
absolute comfort. Dual emission version is available with
both identical optical units and mixed, asymmetric + washer
optical units.
Mile Ceiling
Outdoor ceiling-mounted lights collection, with a rigorous,
minimal design and LED light source that can be combined
with wall, bollard and path versions.
Available in two different sizes and various finishes with a
double layer of powder coating.
Primer version to be painted after installation with regular
water-based colors (tempera, stucco, water-based paints) to
ensure flawless integration with the building.
The optical unit is specifically designed to ensure maximum
visual comfort and direct glare reduction without compromi-
sing overall efficiency: the light source comprises rear power
LEDs; its transparent polycarbonate lenses ensure a control-
led and homogeneous beam of light; and the glossy black
polycarbonate cone reflectors provide an extreme, sharp-an-
gled screening, all in a small footprint.
The optical unit is available in four different beam angles,
allowing a wide range of uses and flexibility in the most varied
architectural settings: both in the case of intense beams and
diffuse light effects, optical control is always exceptional and
spurious light is totally absent.
The anchoring hardware is made of AISI 316L stainless steel.
Ceiling mounting bracket included.
Mile Recessed
Collection of outdoor, ceiling-mounted, recessed lights with
a rigorous, minimal design and LED light source that can be
combined with ceiling, wall, bollard and path versions.
Available in two different sizes and various finishes with a
double layer of powder coating.
Primer version to be painted after installation with regular
water-based colors (tempera, stucco, water-based paints) to
ensure flawless integration with the building.
As in ceiling versions, the optical unit is specifically designed
to ensure maximum visual comfort and direct glare reduction
without compromising overall efficiency: the light source
comprises rear power LEDs; its transparent polycarbonate
lenses ensure a controlled and homogeneous beam of light;
and the glossy black polycarbonate cone reflectors provide
an extreme, sharp-angled screening, all in a small footprint.
The optical unit is available in four different beam angles,
allowing a wide range of uses and flexibility in the most varied
architectural settings: both in the case of intense beams and
diffuse light effects, optical control is always exceptional and
spurious light is totally absent.
The luminaire can be installed in a drop ceiling using the sup-
plied springs. The minimal thickness of the stop frame allows
a perfect, aesthetic finish of the luminaire in the ceiling.
The accessory box for installation in galvanized steel for con-
creting is available for brick or reinforced concrete ceilings.
193
Mile
