Table of contents

• RADIATOR AND FAN-COIL VALVES
  • OPTIMA
  • Thermostatic heads
  • HARMONIA
  • Thermostatic valves
  • Manual valves
  • Lockshields
  • BASIC series valves
  • Radiator kits
  • H valves
  • 4-way distributors
  • Single-pipe thermostatic valves
  • Single-pipe manual valves
  • Accessories for single-pipe valves
  • Fittings
  • Accessories and spare parts
  • Fan-coil valves
  • Fan-coil unit kit
• PIPES AND FITTINGS
  • Pipes
  • Press fittings M•P
  • Press fittings M•P•L
  • Accessories for M•P - M•P•L
  • Press fittings P•M•P
  • Press fittings P•M•P•L
  • Basic fittings
  • Screw fittings
  • Under-floor fittings
  • Tools and general accessories
• MANIFOLDS
  • EASY•RADIANT
  • Brass-rod manifolds
  • Stainless steel manifolds
  • Technopolymer manifolds
  • Cabinets
  • Terminals for manifolds
  • Air vent valves
  • Brackets
  • Bypass valves
  • Fittings and plugs
  • Complementary items
  • Ball valves
  • Zone valves
• RADIANT SYSTEMS
  • HEAT PUMP KIT
  • FLOORMIX
  • 2-way axial valves
  • COMBIMIX
  • TECHNOMIX
  • MULTIFLOOR
  • UNIMIX
  • UNIMIX•C
  • Accessories for UNIMIX - UNIMIX•C
  • UNIFLOOR
  • Pumps
  • IC•BOX
  • Floor systems
  • Ceiling-wall systems
  • Accessories for floor systems
  • Accessories for ceiling-wall systems
  • Dehumidifiers
• THERMAL POWER STATION
  • DIRTSTOP®
  • DIRTSTOP® XL
  • POLIFEMO®
  • BRIX
  • MULTIMIX
  • MULTIMIX•C
  • Accessories for MULTIMIX - MULTIMIX•C
  • VARIMIX
  • Storage tanks
  • Mixing valves for high flow capacity
  • Thermostatic mixing valves
  • Rotor mixing valves
  • Safety valves
  • Automatic filling groups
  • Bypass valves
• REGULATION AND CONTROL
  • CUBODOMO®
  • CLIMA•HUB
  • EQUICALOR•LINK
  • Thermostats
  • Motors
  • Electrothermal heads
  • Wiring accessories
  • Safety thermostats
• HYDRAULIC BALANCING
  • Static balancing valves
  • PICV
  • EQUIFLUID
• SATELLITE MODULES
  • IVAR•ESAT DUAL
  • IVAR•SAT
  • E•SAT - M•SAT
  • SAP - SAP•C
• SANITARY SYSTEMS
  • IS•BOX
  • EASY•LOCK
  • BASIC series manifolds
  • Accessories for sanitary manifolds
  • RTV
  • LEGIO•BOX
  • Thermostatic blenders
  • Safety units
  • SAFEMIX
  • Safety valves
  • Check valves
  • Strainers
  • Pressure reducing valves
• SYSTEMS FOR GAS
  • Isolation valves for meters
  • Distribution and isolation
  • Accessories for gas systems
• METERING SYSTEMS
  • 3-way modules
  • 2-way modules
  • Modules for DW metering
  • Special modules
  • Accessories for metering modules
  • Meters
  • CALOR•MET
  • Data centralisation
• SOLAR SYSTEMS
  • Circulation groups
  • Electronic control units
  • Accessories for solar systems
  • Pipes and fittings
  • Thermostatic diverter valve

Relevant contents

Ivar h valves
Ivar lockshields
Ivar basic series valves
Ivar harmonia
Ivar download all the technical focuses
Ivar 11.000
Ivar 4-way distributors
Ivar fan-coil valves
Ivar press fittings m•p•l
Ivar press fittings p•m•p•l
Ivar basic fittings
Ivar under-floor fittings
Ivar easy•radiant
Ivar cabinets
Ivar terminals for manifolds
Ivar air vent valves
Ivar complementary items
Ivar heat pump kit
Ivar floormix
Ivar 2-way axial valves
Ivar combimix
Ivar technomix
Ivar multifloor
Ivar unimix
Ivar unimix•c
Ivar unifloor
Ivar pumps
Ivar ic•box
Ivar floor systems
Ivar ceiling-wall systems
Ivar dirtstop®
Ivar dirtstop® xl
Ivar polifemo®
Ivar brix
Ivar multimix•c
Ivar varimix
Ivar rotor mixing valves
Ivar safety valves
Ivar automatic filling groups
Ivar cubodomo®
Ivar clima•hub
Ivar equicalor•link
Ivar thermostats
Ivar motors
Ivar wiring accessories
Ivar safety thermostats
Ivar static balancing valves
Ivar picv
Ivar equifluid
Ivar ivar•esat dual
Ivar ivar•sat
Ivar e•sat - m•sat
Ivar sap - sap•c
Ivar is•box
Ivar easy•lock
Ivar basic series manifolds
Ivar rtv
Ivar legio•box
Ivar safemix
Ivar check valves
Ivar strainers
Ivar distribution and isolation
Ivar 3-way modules
Ivar 2-way modules
Ivar modules for dw metering
Ivar special modules
Ivar meters
Ivar calor•met
Ivar data centralisation
Ivar circulation groups
Ivar 0 90
Ivar accessories for m•p - m•p•l
Ivar l28
Ivar isolation valves for meters
Ivar accessories for gas systems
Ivar electronic control units
Ivar accessories for solar systems
Ivar single-pipe thermostatic valves
Ivar single-pipe manual valves
Ivar accessories for floor systems
Ivar g 1” g 1” 1/4
Ivar accessories for unimix - unimix•c
Ivar accessories for metering modules
Ivar accessories for single-pipe valves
Ivar in
Ivar not needed
Ivar no corrosion
Ivar reduced pressure drops
Ivar thermostatic mixing valves
Ivar accessories for sanitary manifolds
Ivar mixing valves for high flow capacity
Ivar accessories for multimix - multimix•c
Ivar accessories for ceiling-wall systems
Ivar °
Ivar vbvsaslancing
Ivar pe-x
Ivar pehd
Ivar tr
Ivar sap•c
Ivar equimeter
Ivar equicompact
Ivar q5 fixing kits
Ivar amu 01 fixing kits
Ivar 1 ys - ) × h + f1 + f2
Ivar a = (wa
Ivar ) × h + (2 × f ) a = (wa
Ivar ys -
Ivar analytical index and code list
Ivar in your favourite language
Ivar radiator and fan-coil valves
Ivar manifolds
Ivar regulation and control
Ivar satellite modules
Ivar sanitary systems
Ivar metering systems
Ivar 9 - 14 days
Ivar +d
Ivar hydronic solutions for every need
Ivar mass market products
Ivar countries where ivar trades
Ivar corporate certifications
Ivar made in italy products
Ivar world business branches
Ivar sqm total surface of production area
Ivar and customized solutions
Ivar fitting for
Ivar types of pipe
Ivar •m28 × 1,5
Ivar •m30 × 1,5
Ivar now available
Ivar or
Ivar p p
Ivar km02m
Ivar km01t
Ivar km03m km04m
Ivar focus 2: ring nut substitution
Ivar focus 1: pre-regulation
Ivar focus 1: temperature limitation and lock
Ivar focus 2: liquid expansion sensor
Ivar focus: static and dynamic
Ivar focus: ring nut substitution
Ivar focus: pre-regulation
Ivar drm series: double micrometric
Ivar focus: age 15 telescopic fitting
Ivar focus: mp 5736
Ivar focus: u-fittings
Ivar focus: screw fittings for both multilayer and pex pipe
Ivar focus: outlets misalignment (for 1” manifolds only)
Ivar on the 1" version: dual-chamber system
Ivar focus: splitter fitting
Ivar focus: aquastop
Ivar focus: inlet port with swivel fitting
Ivar focus: mixing kits
Ivar focus: kit per alta temperatura
Ivar plus
Ivar focus: hydraulic separation
Ivar focus: three- and four-way mixing
Ivar plus (is•box)
Ivar mt ht
Ivar mt sol
Ivar mt
Ivar plus (equimeter)
Ivar plus (equicompact)
Ivar +r*
Ivar +t
Ivar +rcr*
Ivar +rc
Ivar adjustment and position memory.
Ivar a = (ways - 1) × h + (2 × f )
Ivar larger internal bore and
Ivar due to stray currents
Ivar pipe calibration and chamfering
Ivar finishes
Ivar +m
Ivar 1,25
Ivar 0,75
Ivar 1,50
Ivar 2,00
Ivar 9-14 days
Ivar 28 days
Ivar can be connected in series
Ivar is•box plus
Ivar is•box mplus
Ivar single-hop
Ivar multi-hop
Ivar focus
Ivar focus: dynamic insert
Ivar extra
Ivar standard
Ivar 30 %
Ivar suitable dehumidification systems
Ivar • operating with water down to 14°c in cooling mode when used with
Ivar anti-condensation function.
Ivar ) with insulation and
Ivar • rugged and lightweight composite materials. • resistance to chemicals, uv rays and corrosion. • suitable both for radiant heating and cooling systems. • dual-chamber system (
Ivar out
Ivar • anti-frost and anti-lock function • possibility to carry out tests and forcing
Ivar • management of up to 14 temperature/humidity zones • module for integration of cooling with dehumidification • possibility to assign a temperature or humidity function to each
Ivar • accessory for management via colour touchscreen interface • control of two different terminal devices with a zone timer
Ivar zone relay with specific comfort time bands
Ivar thermostat/humidistat
Ivar established in 1985 as company focused on the production of valves, over the years ivar actively seeks and develops new products reaching high quality standards, to become today one of the leading companies in the sector of plumbing and heating components. from sourcing raw materials to choosing our packaging, every process is carefully examined and optimised to save energy and materials in facilities with near-zero environmental impact. the italian headquarters also acts as a hub for the wider ivar group, set up with the goal of distributing products beyond italy’s borders. the group now has branches in belgium, china, germany, the united kingdom, the czech republic, romania, slovakia, spain, the united states and tunisia.
Ivar • minimal and elegant design, suitable for modern heated towel rails • several finishes available • head with internal liquid expansion thermostat • equipped with selector for flow rate pre-regulation • ring nut can be replaced even when the system is working
Ivar • no temperature imbalances in rooms • better regulation accuracy • lowered return temperature, with a significant increase of condensing boiler
Ivar efficiency
Ivar • available with anti-tamper ring nut and temperature limitation/lock functions • liquid expansion sensor
Ivar standard series
Ivar n series (with flow rate selector)
Ivar installation layout
Ivar • compact and pre-assembled for an easy and quick installation • multifunction: 5 operating and maintenance modes • simplified system maintenance • flow control via picv • flow measurement and precise balancing thanks to the venturi orifice and
Ivar intermediate layer
Ivar inner and outer layer
Ivar bonding layers
Ivar • material with low surface roughness, reduces the risk of scale • highly resistant to chemical agents and especially to chlorinated water • high mechanical strength at both high and low temperatures
Ivar • particularly flexible • good strength characteristics at high temperatures • economically competitive
Ivar • compatible with all th - h/r - u - b/be - f crimping profiles • complete range of figures • ø from 16 to 63 mm
Ivar • compatible with all th - h/r - u - b/be - f crimping profiles • complete range of figures • ø from 16 to 32 mm
Ivar • compatible with all th - h/r - u - b/be - f crimping profiles • maximum corrosion resistance • ø from 16 to 32 mm
Ivar • automatic alignment thanks to offset threads • offset female thread to house and safeguard the o-ring during installation • available with 3, 4 or 5 outlets and main fitting 1” • versions with outlets 3/4” ek and m24 • o-ring for soft seal: no additional sealant required
Ivar manifolds kit width and suitable cabinet
Ivar examples of application for easy•radiant manifold accessories
Ivar • each manifold is tested to guarantee grip on assembled components and on
Ivar 100% of production.
Ivar • subject to stress relieving heat treatment to remove residual tension due to
Ivar • compatible with both low and high temperatures.
Ivar mechanical processing.
Ivar examples of application for brass rod manifold accessories
Ivar single manifold dimensions
Ivar 1”1/2 single manifold dimensions
Ivar • large transit section for increased flow rate. • lightweight and easy to install. • compatible with both low and high temperatures. • optimal mechanical resistance to corrosion • competitive price
Ivar manifold kit dimensions and suitable cabinet
Ivar examples of application for stainless-steel manifold accessories
Ivar 1“1/4 single manifold dimensions
Ivar 1“ single manifold dimensions
Ivar • rugged and lightweight composite materials. • limited formation of condensation. • resistance to chemicals, uv rays and corrosion. • suitable both for radiant heating and cooling systems.
Ivar 200 mm 250 mm
Ivar • booster unit for heat pump applications. • versatility of installation. • installation to the left or right of the distribution manifolds. • connections to primary from the sides or bottom. • use with pumps with 130 mm or 180 mm centre distance.
Ivar two multi-function fittings
Ivar accessories
Ivar mixing unit
Ivar booster unit
Ivar • complete compact system for radiant system control • fixed point or climate control • two-way mixing control valve • pump centre-to-centre distance 130 mm or 180 mm with shutoff valves
Ivar to obtain maximum compactness.
Ivar • available with fixed point or weather compensated regulation. • reversible system: connection to primary from right or left.
Ivar • temperature control carried out by a two-way valve («injection» system)
Ivar • integrated thermostatic insert for optimal fixed station control (28-53 °c) • designed to control medium size residential systems • balancing valve and control integrated on primary circuit
Ivar • compact system for radiant heating and cooling • fixed point or climate control • three-way mixing control valve • manifold kit with dedicated straight branches
Ivar supply block with accessories booster pump 3-way mixing valve
Ivar • compact system for radiant heating and cooling • fixed point or climate control • 3-way mixing control valve • manifold kit with dedicated straight branches
Ivar ø16/2 - ø17/2 mm
Ivar uni en 1264:2021 certified system
Ivar 5 cm
Ivar free
Ivar ø16/2 - ø17/2 - ø20/2 - ø25/2,3 mm
Ivar ø20/2 mm
Ivar comparable to brass.
Ivar • it can be installed in any position straight out of the box. •internal separation chamber which guarantees perfect filtration in all
Ivar spaces.
Ivar • maintenance can also be carried out while the system is running: the unit can
Ivar • made from ixef®, a technopolymer with extraordinary mechanical properties,
Ivar be cleaned without disassembly.
Ivar ensuring quick and easy cleaning at all times.
Ivar • large settling chamber complete with a ball valve for draining off impurities,
Ivar installation positions.
Ivar • extremely compact for easy installation under the boiler, even in confined
Ivar • the patented insert creates a cyclone in the moving water. • mechanical filtration of system impurities with 800 μm s-profile mesh. • two high-power (2 x 12000 gauss) magnets provide improved retention of
Ivar reducing purging frequency.
Ivar • large (450 ml) settling chamber for accumulation of the collected impurities,
Ivar • gravitational action on the impurities for accumulation in the lower part of
Ivar guaranteeing total ease of installation.
Ivar the dirt separator.
Ivar ferrous impurities.
Ivar • high flow rate, ideal for use in systems with heat pumps. • the connections can be used for both input and output from the device,
Ivar • high flow rate and low pressure loss thanks to the new dosing principle
Ivar • level indicator with transparent glass for easy inspection (see
Ivar • super compact, it fits into any system. • new version with extralarge glass with more crystals, in order to
Ivar • robustness and reliability: brass cap that ensures maximum resistance to
Ivar recharge polifemo only once a year.
Ivar level in all positions.
Ivar with venturi effect and to the two versions (1/2“ and 1”).
Ivar • horizontal or vertical installation with accurate display of the charge
Ivar • easy refill thanks to the air vent, which makes disassembly of the ring nut
Ivar more simple.
Ivar water hammer.
Ivar • reversible connections to easily adapt to different installation positions. • snap-in female connection, for a simple and quick installation of the
Ivar drain pipe.
Ivar • neutralizing action to prevent corrosion from acid condensation. • quick and easy maintenance thanks to the stainless-steel neutralizer
Ivar • extremely compact to easily find a place under the boiler. • transparent body to always keep the neutralizing charge level under control.
Ivar charge container which facilitates the refilling and replacement of the neutralizing charge.
Ivar • compact, modular and expandable • integrated hydraulic separator in main manifold • possibility of supply from top to bottom, right/left • pre-assembled configurations available • suitable for heating and cooling
Ivar manifold/separator
Ivar direct distribution kit
Ivar • compact and flexible (2 or 3 zones) • integrated hydraulic separator in main manifold • pre-assembled configurations available • suitable for heating and cooling
Ivar hydraulic separator
Ivar distribution and mixing kit
Ivar modular manifold
Ivar selected configuration of inputs/outputs
Ivar • seal on rotor piston ensured by 2 large section o-rings • external o-ring easily replaced when necessary • plate with graduated scale, easily removable and rotated to adapt travel to
Ivar • much lower weight and reduced dimensions in proportion to strength
Ivar system requirements
Ivar sector mixer valves
Ivar compared to traditional valves in cast iron
Ivar • different kv values for the same size, to enable more targeted use according to
Ivar 4-way valves
Ivar 3-way valves
Ivar safety valves for heating applications
Ivar example of cubodomo system application
Ivar starter pack: master sensor with relay
Ivar starter pack: cube
Ivar relay sensor (with actuator function)
Ivar sensors without relay
Ivar wiring center
Ivar • multi-zone system: customised comfort in every area • wireless communication among devices • remote control via software and web manager • advanced energy-saving management functions • intuitive multilingual menu with guided configuration • ideal for climate control in public buildings
Ivar home network
Ivar • dynamic balancing of variable flow systems • optimisation of the operation of centralised systems • improvement of control valve operating conditions in the balanced circuit • reduction of noise phenomena
Ivar • fast, simple calibration. • simplified installation, all accessories incorporated in a single component. • ultra-compact solution: the size of the manifold housing does not need to
Ivar be increased.
Ivar • greater energy savings. • reduced noise, by keeping the speed of the water in the circuits under
Ivar control at all times.
Ivar • energy saving thanks to electronic temperature control of the boiler return. • power of the heat exchanger in dhw production up to 55 kw. • electronic dhw temperature control. • heat exchanger power for heating up to 24 kw. • electronic control with external compensation for the heating delivery
Ivar • electronic intervention for: circuit temperature monitoring, water hammer
Ivar delay, plumbing flow rate check by flowmeter, anti-lock function, fouled exchangers warning, pwm circulator control in heating mode, intelligent automatic loading.
Ivar application example
Ivar • can be equipped with domestic hot water recirculation fittings • flush- or wall-mounted installation • electronic management of domestic hot water priority • ideal dhw delivery temperature control via thermostatic mixer
Ivar low temperature (ivarsat l/le), combined (ivarsat hl/hle)
Ivar • available in the following versions: high temperature (ivarsat h),
Ivar installation layouts
Ivar • available with white or chrome finish • completely pre-assembled
Ivar available with
Ivar 3/4” or 1” main
Ivar manifold dimensions
Ivar (round section)
Ivar manifold dimensions (round section)
Ivar manifold dimensions (octagonal section)
Ivar (octagonal section)
Ivar manifolds dimensions
Ivar • available in sizes dn 15-20 with 1/2" f - 3/4" f connections in the 3 variants
Ivar can also be included
Ivar • an anti-legionella cycle with mechanical or electronically controlled bypass
Ivar • wide temperature regulation range 35 °c – 60 °c • reduction of heat dispersion thanks to limitation of maximum flow rate in
Ivar circuit branches.
Ivar a -b - c
Ivar • maximum comfort thanks to constant temperature • including inlet check valves • anti-scald safety device: if there is no cold water the valve closes automatically
Ivar avoiding the scalding of users
Ivar • recommended where there are dhw storage tanks where the accumulated wa-
Ivar ter may undergo thermal shocks from an anti-legionella cycle
Ivar • stable temperature regulation. • suitable for heating or dhw applications (both at the point of distribution
Ivar • available for solar applications and with high-temperature regulation. • wide range of connections, with and without check valve.
Ivar and point of use).
Ivar • safety function against overpressure (safety valve set at 7 bar)
Ivar • anti-contamination function thanks to the built-in check valve • special versions for hard water with a ptfe seal or for acidic water with
Ivar a stainless steel seal
Ivar • a thermostatic mixer and a safety unit in a single component • ease of installation • including a dielectric connection for electrical insulation
Ivar safety valves for sanitary applications
Ivar the correct operation of the check valve can be verified
Ivar • ea type devices, can be inspected: because of the two control ports,
Ivar • suitable for applications with category 2 water
Ivar • protects the lines from excessive pressure • reduces wasted water • prevents noise phenomena in the lines • the filter can be cleaned without having to remove it
Ivar • freely configurable with volumetric meters for dhw, dcw and dual water • simplified and patented procedure for balancing utilities • connections to utilities with 3/4” flat-seal fittings for all versions • pre-assembled or in a template with separate components
Ivar • suitable for applications with electronic variable displacement pumps • prearranged for use with equifluid for dynamic balancing of utilities • extremely compact for installation in any compartment
Ivar • freely configurable with volumetric meters for dhw, dcw and dual water • equipped with a picv valve for dynamic balancing of the flow rate • pre-assembled or in a template with separate components
Ivar • minimal risk of sticking between rotor and body in the event of extended inactivity
Ivar • compact solution ideal for thin walls (installation thickness of only 60 mm)
Ivar • manual draining and cut off available for maintenance operations
Ivar a b c
Ivar heat cost allocator
Ivar key for metering units
Ivar domestic water lines
Ivar patented system
Ivar control block
Ivar liquid sensor
Ivar insulation shell
Ivar temperature control
Ivar pre-adjustment of flow rate
Ivar dynamic balancing
Ivar flow selector
Ivar dynamic insert
Ivar thermostatic insert
Ivar the most suitable regulating cartridge can be chosen for each valve:
Ivar 63 °c / 50-63 °c - max 90 °c
Ivar 50 °c / 36-50 °c - max 120 °c
Ivar 50 °c / 36-50 °c - max 90 °c
Ivar 35-55 °c (max temp. 110 °c)
Ivar 40-80 °c (max temp. 110 °c)
Ivar 35-55 °c (max temp. 85 °c)
Ivar safemix 05
Ivar mt 05
Ivar chrome
Ivar black
Ivar white
Ivar silver
Ivar inox
Ivar bypass
Ivar integrated filter
Ivar proportional dosage
Ivar ■ with regulation range of 35-55 °c and maximum inlet temperature up to 85 °c;
Ivar manifold positioned to the left
Ivar manifold positioned to the right
Ivar it always filters
Ivar in all positions
Ivar filtering mesh
Ivar powerful magnet
Ivar swiveling
Ivar connections
Ivar 9 8 7 6 5 4 3 2 1
Ivar 13 12 11 10
Ivar all ivar thermostatic heads are available on request with m28 × 1.5 connection
Ivar temperature limitation temperature lock
Ivar 5 operating modes
Ivar applications
Ivar picc 03
Ivar rv 03
Ivar te 3003
Ivar picc 02
Ivar picc 01
Ivar made of aluminium alloy
Ivar a strong adhesive guarantees adhesion of the layers
Ivar made of plastic
Ivar guide for
Ivar after crimping
Ivar double o-ring
Ivar crimping
Ivar solution-treated stainless steel to protect the crimper
Ivar sawtooth profile for maximum pull-out resistance
Ivar for maximum seal
Ivar correct crimping
Ivar shaped bushing with a teflon ring with leak indication during the system test.
Ivar even after
Ivar extended slots to check for proper pipe insertion
Ivar optimized water flow (reduced pressure loss)
Ivar double o-ring for maximum seal after crimping
Ivar fitting
Ivar can be rotated
Ivar insert with
Ivar fluxer®
Ivar thermostatic control option
Ivar lockshield
Ivar (new version with dynamic insert available)
Ivar insert with thermostatic control option
Ivar central chamber
Ivar air chamber with insulation and anti-condensation function
Ivar ✕
Ivar 1. air-vent valve 2. flow temperature sensor 3. pump isolation valves 4. booster pump 5. safety thermostat pocket 6. thermometer 7. fill/drain valve connection
Ivar two-way valve with pre-mixing port two-way valve two-way valve with pre-mixing port two-way valve
Ivar fixed-point adjustment
Ivar weather-compensated adjustment
Ivar 1. 2-way control valve with motor drive or
Ivar 4. shutoff ball valve
Ivar 3. high-efficiency variable rpm pump; centre-
Ivar 2. mixing balancing valve
Ivar controlled by thermostat head
Ivar 5. filler/drain valves 6. automatic air purge valves 7. thermometers
Ivar to-centre distance 130 mm or 180 mm
Ivar connectors on combimix using two ac 606 nipples
Ivar 1 2
Ivar 2. vertical version, using the special kit, including simple or shutoff version
Ivar manifolds and all required accessories.
Ivar the combimix system offers two options to supply high temperature components directly using the boiler fluid: 1. horizontal version, with standard manifolds connected to the primary
Ivar primary bypass: • recirculation on generator • balancing
Ivar primary bypass: • circulation on generator • balancing
Ivar secondary bypass: • improved mixing control • increased flow rate to circuit
Ivar 3a
Ivar 3c
Ivar 3b
Ivar pipes that can be installed
Ivar restoration
Ivar residential
Ivar multiple laying steps
Ivar typical application
Ivar industrial
Ivar residential/industrial
Ivar reduced water absorption for application in humid rooms (type h1*) increased density (type d*) and reduced steam permeability (type e*) high surface hardness and mechanical resistance (type i*) ionizing: it can absorb up to 70% of the formaldehyde in the air
Ivar supply pipes that can be installed
Ivar *according to standard uni en 520:2009
Ivar tertiary
Ivar panels available with smooth (l) or micro-drilled (f) surface, in ral 9016 white
Ivar even in confined spaces.
Ivar ultra compact: for easy installation
Ivar powerful magnet with vertical polarisation to generate a much more uniform magnetic field, thus optimising capture of all impurities.
Ivar four different installation positions (see fig. 1). body in ixef technopolymer®: extraordinary mechanical properties, comparable to brass. corrosion-resistant. swivelling insert (patent pending): maximum efficiency in any installation position. internal strainer with 800 μm mesh. large settling chamber, with 360° swivel fitting: conveys waste to the drain valve. shutoff drain valve:
Ivar that accumulates at the bottom of the settling chamber, via the integrated drain valve.
Ivar via side connection
Ivar • safety thermostat, thermometers, non-return valve
Ivar • three functions:
Ivar • pump with shutoff provision and simplified installation
Ivar • connections to primary from right, left, top or bottom • connections for multiple heat generators
Ivar • thermometers, non-return valve
Ivar - flow manifold - return manifold - hydraulic separator (with shutoff provision)
Ivar • option of fixed point or climate control • pump with shutoff provision and simplified installation
Ivar simultaneously
Ivar • two or three zones, expandable with additional module
Ivar tnanks to telescopic connection
Ivar system is running by means of an externally controlled shutter.
Ivar essential function in systems with multiple pumps that can operate simultaneously.
Ivar makes all circulation pumps installed on the secondary and primary circuits completely independent from one another.
Ivar • the manifold incorporates the hydraulic separation, an
Ivar • the separator creates a hydraulic short circuit, which
Ivar • the hydraulic separator can also be shut off while the
Ivar • 3 functions:
Ivar • two or three zones
Ivar • option of fixed point or climate control • safety thermostat, thermometers, non-return valve • pump with shutoff provision and simplified installation
Ivar - delivery manifold - return manifold - hydraulic separator (with shutoff provision before installation)
Ivar thanks to telescopic connection
Ivar • thermometers, non-return valve • pump with shutoff provision and simplified installation
Ivar list of components in this varimix application
Ivar with option of creating combined configurations.
Ivar or left as required.
Ivar with low temperature heat sources (e.g. heat pumps)
Ivar • used for distribution to low temperature utilities
Ivar impurities.
Ivar nipples.
Ivar • the solution with 4-way mixer valves also enables
Ivar of distribution module for easier maintenance.
Ivar • this enables the hydraulic separation of various
Ivar towel rails or to heat domestic hot water stored in storage tanks.
Ivar mixing on return to the boiler, thereby avoiding corrosion phenomena due to acid condensation in older generators.
Ivar • “lt” versions specially designed for applications
Ivar circulation pumps installed, keeping the various distribution modules independent.
Ivar • motorised mixer valves for precision control of
Ivar • enables creation of the main distribution backbone. • connection between individual manifolds via rotary
Ivar • automatic purge valve to remove air bubbles • filler/drain valve on base to remove waste and
Ivar factor kv.
Ivar • available in different versions according to the flow
Ivar • high-temperature booster module without mixing. • used to supply components such as radiators or
Ivar such as radiant panels for underfloor heating.
Ivar • distribution module complete with 3 or 4-way
Ivar • distribution from bottom to top or vice versa, also
Ivar sector mixer valves.
Ivar • completely reversible: can be supplied from right
Ivar • integrated shutoff valves to enable disconnection
Ivar supply temperature.
Ivar download
Ivar list of cubodomo components
Ivar 24 v ac - 20/30 v dc supply modbus rs-485 and can-bus ports
Ivar 7 digital outputs
Ivar 6 analog inputs 5 digital inputs 3 analog outputs
Ivar lcd display
Ivar usb port
Ivar 2 digital outputs
Ivar operation of radiant circuit and zone dehumidifier or alternatively radiant circuit and zone radiator
Ivar example of operation with radiant circuits and dehumidifiers
Ivar programmable time bands
Ivar can-bus port temperature and humidity probe
Ivar summer/winter operation 115/230 v ac power supply
Ivar compatible with 503e or square electrical boxes (fig. 2)
Ivar 24 v ac - 12/30 v dc power supply
Ivar wall installation
Ivar color touch-screen display system monitoring from a single terminal in the room
Ivar across a calibrated orifice
Ivar available from dn 15 to dn 50, with female, male or male fittings with a union
Ivar keeps the differential pressure constant
Ivar three types of cartridges, picc 03/13 insert, can be motorised with on/off or proportional actuator
Ivar piezometric ports to check operating range
Ivar spring/diaphragm action system, which
Ivar regulating the circulating flow rate
Ivar hole for lead seal
Ivar partner valve for measuring and
Ivar of the delivery pressure
Ivar capillary tube for transmission
Ivar adjustment knob with an
Ivar indicator of the set value
Ivar ivar e-sat mono
Ivar ivar e-sat tank
Ivar hc ivar e-sat dual
Ivar knobs with new ergonomic design
Ivar indicator incorporated in the knob
Ivar new easy-label technology: it is not necessary to remove the screw to insert the reversible plate, thanks to the interlocking positioning
Ivar single reversible plate (hot/cold) with supply terminal icon
Ivar automatic alignment by hand thanks to offset threads. no tightening tool is required. o-ring for soft seal: no additional sealant such as hemp or teflon required.
Ivar no additional sealant such as hemp or teflon required.
Ivar o-ring for soft seal:
Ivar automatic alignment by hand thanks to offset threads. no tightening tool is required.
Ivar outlet interaxis: 35 mm
Ivar single reversible plate (hot/cold) with supply terminal indicator
Ivar manifolds and under-floor valves connections with suitable fittings
Ivar factory tested
Ivar direct metering
Ivar indirect metering
Ivar enables easy and quick cleaning also with the system running (see fig. 2).
Ivar special cleaning via the strainer mesh and lower casing, to be carried out at least once a year.
Ivar • three-way piston mixing valve and secondary bypass
Ivar 50.900
Ivar ivar