Valvola di bilanciamento flangiata / Flanged balancing valve

Serie Ekoflux S

Le valvole Serie Ekoflux realizzano il bilanciamento della

portata nel circuito generale o nei singoli rami degli im-

pianti di riscaldamento e di condizionamento.

Consentono di correggere gli squilibri nell’alimentazione

tra le utenze (squilibri che possono inoltre causare rumo-

rosità ed usura sugli elementi costituenti l’impianto) e per-

mettono un miglioramento del comfort ambientale unita-

mente ad una ottimizzazione dei consumi energetici.

Realizzano inoltre le funzioni di intercettazione e misura-

zione. La preregolazione continua, consente di controllare

esattamente la perdita di pressione e la portata.

Permette inoltre la trasmissione della pressione di manda-

ta al regolatore di pressione DPCV.

Possono essere montate indifferentemente sul ramo di ali-

mentazione e di ritorno.

Il DN 50 presenta attacchi filettati F/F, per installazione tra

flange può essere equipaggiato con flange riportate.

Adatte per flange PN 16 e ANSI 150.

Accessori

• Strumento elettronico per la misurazione della pressione

differenziale, della portata ed

il bilanciamento degli impianti

• Raccordi con siringa ad innesto rapido

Conformi alla direttiva 2014/68/UE (ex 97/23/CE PED)

Norme costruttive e di collaudo (equivalenti):

Scartamento: EN 558-1 ISO 5752

Flange: EN 1092 ISO 7005

Design: EN12516

Marcatura: EN19

Collaudo: testate al 100% EN 12266

The valves in the series EKOFLUX balance the flow in main

circuits or single sections of heating or conditioning plants.

They allow correcting irregularities in the supply of the single

users (irregularities which might cause noise and damage

the components of the plant) and, as a result, improve envi-

ronmental comfort and optimize energy consumption.

They perform shut-off and measuring functions. The contin-

uous presetting function allows controlling the loss of pres-

sure and of the flow rate.

They can be installed indifferently on the supply piping and

on the return piping.

It also allows the transmission of the delivery pressure to the

DPCV pressure regulator.

DN 50 has F/F threaded end. In order to be installed between

flanges it could be equipped with add-on flanges, suitable

for PN 16 and ANSI 150 flanges.

Accessories

• Electronic instrument for measuring the

differential pressure, flow rate and balancing of the circuit

• Pressure gauge probe adaptor

In conformity with directive 2014/68/UE (ex 97/23/CE PED)

Design and testing standards (correspondences):

Face-to-face: EN 558-1 ISO 5752

Flanges: EN 1092 ISO 7005

Design: EN12516Marking: EN19

Testing: 100% testing according to EN 12266

310

www.brandonivalves.it

V

A

L

V

E

S