Micromosaics

10. ASCIUGATURA COLLA

A questo punto lasciare asciugare per 24/48 ore prima della

operazione di stuccatura.

11. RIMOZIONE COLLA IN ESUBERO

Prima dell’operazione di stuccatura rimuovere dove serve la colla

fuoriuscita dalle fughe.

12. PROTEZIONE DEL MATERIALE (obbligatorio per il colore WHITE)

Su tutti i Micromosaics. opachi e mix (no glossy) prima

della stuccatura, è consigliabile la stesura con pennellessa

dell’impregnante Fila MP 90. Questo consente, chiudendo qualsiasi

porosità, di poter rimuovere lo stucco con facilità.

13. STUCCATURA DEL MATERIALE

Almeno dopo 24 ore dall’applicazione del FILA MP90 utilizzare gli

stucchi consigliati andando a stuccare il materiale. Rimuovere lo

stucco in eccesso prima che lo stesso si indurisca.

14. PULIZIA DEL MATERIALE

Con una spugna, prima che lo stucco si indurisca, lavare con

abbondante acqua il materiale. Ripetere l’operazione più volte fino

alla rimozione totale dello stucco dalla superficie delle tessere.

Per rimuovere residui di stucco epossidico usare il detergente Fila

PS/87, Litonet Gel o Litonet Pro, versare il prodotto puro, lasciare

agire 15/20 minuti, strofinare con disco o spugna abrasiva e

risciacquare. Nel caso si utilizzasse stucco a base cementizio si

consiglia almeno dopo 24 ore dalla

stuccatura di utilizzare il detergente acido Deterdek diluito 1:5 in

acqua. Versare la soluzione, lasciare agire 5/6 minuti, strofinare

con disco color verde o spugna abrasiva e risciacquare. Per la

serie Glossy non utilizzare il detergente Fila PS/87 puro perché

danneggia lo smalto.

15. MANUTENZIONE

Per la manutenzione ordinaria lavare con il detergente neutro

Fila Cleaner diluito 1:200 (1/2 tazzina da caffè in 5 litri di acqua)

utilizzando uno straccio umido che andrà sciacquato spesso nella

soluzione. Per sporchi più intensi usare il detergente Fila PS/87

diluito. Risciacquando al termine del lavaggio.

Consigli per la posa

Laying guide

10. DRYING THE GLUE

Before grouting, you have to leave the glue to dry for 24-48

hours.

11. REMOVING EXCESS GLUE

Before proceeding with the grouting, remove any excess glue

from the joints.

12. PROTECTING THE MOSAICS (mandatory for WHITE material)

On all opaque and mixed (no glossy) Micromosaics, it is advisable

to apply Fila MP 90 impregnating agent with a brush before

grouting. This closes any porosity and makes it easy to remove

the filler.

13. GROUTING

Wait at least 24 hours after the application of FILA MP90, then

use the recommended grouts to grout the mosaics. Remove any

excess grout before it hardens.

14. CLEANING THE MOSAICS

Using a sponge, wash the mosaics thoroughly with water before

the grout hardens. Repeat this operation several times until all the

grout has been removed from the mosaic surface. Use Fila PS/87,

Litonet Gel or Litonet Pro detergent to remove any remaining

residues of epoxy grout. Pour the product on undiluted, leave it

work for 15-20 minutes, and then remove with a disc or abrasive

sponge before rinsing again. If you are using a cement based

grout, wait at least 24 hours after grouting before using Deterdek

acid detergent diluted 1:5 in water. Pour the diluted solution on,

leave it work for 5-6 minutes, then rub off with a green disc or an

abrasive sponge before rinsing again. Do not use undiluted Fila

PS/87 detergent on Glossy series surfaces, since it can damage

the glaze.

15. MAINTENANCE

For normal cleaning purposes wash the surface down with Fila

Cleaner neutral detergent diluted to a ratio of 1:200 (1/2 a coffee

cup to 5 litres of water) using a damp cloth and rinsing the cloth

frequently in the solution. For tougher dirt use diluted Fila PS/87

detergent. Always rinse down on after washing.

Micro.

185