ProtEttIVI - ANtICorroSIVI / CORROSION PROOFING AGENTS

E

new

new

C

L

U

A

S

d

t

I

E

C

r

CODICE ARTICOLO

CODE

CONFEZIONE

CONTENS

U.M.

M.U

PZ. / PALLET

PCS. / PALLET

CODICE ARTICOLO

CODE

CONFEZIONE

CONTENS

U.M.

M.U

PZ. / PALLET

PCS. / PALLET

P

Nuovo formato da 1⁄2 litro

New 1⁄2 liter format

FILMAX 2X STronG Condizionante anticorrosivo concentrato con battericida

Condizionante chimico a doppia concentrazione avente funzione di inibitore di corrosione, protettiva e

filmante, con esplicita azione antincrostante, idoneo per impianti termici multimetallici, sia tradizionali

che di ultima generazione e a pannelli radianti. Compatibile con tutti i metalli e le materie plastiche

che compongono un impianto termico. FILmAX 2X è un prodotto a base di sali inibitori che evita

l’adesione dei carbonati e protegge dall’ossidazione e dalla corrosione i comuni metalli. Forma un film

monomolecolare protettivo sulle pareti degli impianti termici e refrigeranti ed elimina le sollecitazioni

termiche e gassose dovute all’accoppiamento di metalli diversi. FILmAX 2X contiene inoltre un

efficace biocida ad ampio spettro in grado di impedire, o comunque ridurre notevolmente, lo sviluppo

di alghe e prodotti biologici all’interno dell’impianto (es. pannelli radianti, sistemi geotermici, impianti

di refrigerazione, etc). Lo sviluppo incontrollato di alghe o flora batterica crea infatti impedimenti alla

regolare circolazione dell’acqua all’interno del circuito, impedendo dunque il regolare scambio termico

dell’impianto stesso. MODO D’USO: Il prodotto è consigliato sia su impianti nuovi che mediamente

datati, ma non compromessi. Dopo aver verificato il contenuto di acqua dell’impianto ed aver eseguito

la pulizia dello stesso con FerroneX oppure AnTIneX a seconda che si tratti di un impianto nuovo

oppure esistente da oltre 6 mesi, introdurre FILmAX 2X nell’impianto attraverso il punto più congeniale,

utilizzando se necessario una pompa di carico oppure il sistema di dosaggio FILTAnK collegandosi ad

un punto dell’impianto. Si consiglia di usare un minimo di 0,5 lt di prodotto ogni 100 lt di acqua

circolante, per ottenere valori di pH debolmente alcalini (da 8 a 9 c.a). NB: Per la procedura dettagliata

consultare la scheda tecnica del prodotto

Concentrated anticorrosive conditioner with bactericide

Double concentration chemical conditioner that acts as a corrosion inhibitor, protective and filming,

with specific anti-scaling action, suitable for multi-metallic thermal systems, both traditional and latest

generation’s, and those with radiant panels. Compatible with all metals and plastics used in heating

systems. FILMAx 2x is based on inhibitory salts, which avoid the adhesion of carbonates and protects

common metals from oxidation and corrosion. It forms a monomolecular protective film on the surfaces

of heating and cooling systems, eliminating thermal and gaseous stresses due to the coupling of

different metals. FILMAx 2x also contains an effective broad-spectrum biocide capable of preventing,

or significantly reducing, the development of algae and biological products within the plant (e.g. radiant

panels, geothermal systems, refrigeration systems, etc.). The uncontrolled development of algae or

bacterial flora creates obstacles to the regular circulation of water within the circuit, also preventing

the system’s regular heat exchange. INSTRUCTION FOR USE: The product is recommended for both

new and moderately dated systems, but NOT compromised ones. After checking the water content

of the system, and cleaning it with FERRONEx or ANTINEx (depending on whether it is a new or

over 6 months age system), introduce FILMAx 2x into the system through the most congenial point;

if necessary, use a loading pump or the FILTANK dosing system by connecting them to the system in

the most suitable spot. We recommend using a minimum of 0,5 litre of product per 100 litres of

circulating water, in order to obtain weakly alkaline pH values (from 8 to 9 c.a).

NB: For the detailed procedure, consult the product data sheet.

FIL-20500

500 ml

pz/pcs

16

1120

FIL-2K003

3 lt

pz/pcs

4

224

FILMAX+Thermakil

®

Anticorrosivo universale con antialga

Protettivo anticorrosivo per impianti termici e refrigeranti. Formando un film monomolecolare sulle pareti

degli impianti elimina le sollecitazioni termiche e gassose dovute all’accoppiamento di metalli diversi.

MODO D’USO: usare un minimo di 1 lt o 2 di prodotto ogni 100 lt di liquido circolante. Le quantità sono

in funzione della varietà dei metalli che compongono l’impianto e vanno stabilite in base alla durezza e

alla purezza dell’acqua (intesa come assenza di ioni corrosivi) ed alla temperatura di esercizio, piu’ è alta

e maggiori saranno le quantità da utilizzare. e’ necessario impiegare FILmAX su impianti nuovi o ben

decapati, in abbinamento ad ATIGeL / ALIGeL se presente in % inferiori del 30 %.

Universal anticorrosive with antialgae

This is a product preventing carbonates to adhere and protecting from oxidation and corrosion,

by forming a protective molecular film on thermal systems walls and eliminating thermal and gas

shocks due to the assembling of different metals. It is compatible with ordinary antifreezing products.

INSTRUCTION FOR USE: Use at least 1 or 2 liters of product in 100 liters of running liquid. Quantities

change according to the variety of metals composing the system and depend on the water hardness

and purity (which is to say, on the absence of corrosive ions), as well as on the working temperature.

The higher the temperature is, the greater quantity will be needed. You need to match FILMAx on new

plants or well pickled in combination with ATIGEL / ALIGEL if present in % lower than 30 %.

pz/pcs

12

384

pz/pcs

4

128

pz/pcs

1

36

Nuovo formato da 3 litri

New 3 liter format

C

C

FIL1000e

FILK005

FILK025

1 lt

5 lt

105

25 lt

p