Dati Fotometrici

Photometric Data

Con il passare del tempo, è aumentato il numero di input

visivi ai quali l’uomo è esposto. Attualmente, sembra che

circa il 75% delle informazioni elaborate dall’uomo per

rapportarsi al proprio ambiente siano ricevute attraverso

gli occhi, che funzionano in modo simile ad una macchina

fotografica, utilizzando la luce emessa o riflessa dagli

oggetti presenti in un determinato ambiente. Ciò significa

che le informazioni elaborate dal cervello dipendono

fortemente dai livelli, dal tipo di luce, e dal modo con cui

tale ambiente viene illuminato.

Con la documentazione fotometrica redatta (in particolare

tramite il programma di calcolo) intendiamo fornire ai

progettisti illuminotecnici il materiale necessario per la

realizzazione dei progetti di illuminazione rispondenti

all’attuale normativa EN 12464-1 in termini di adeguata

distribuzione della luce, comfort visivo, massima efficienza

luminosa e quindi consumo energetico ridotto al minimo

possibile. Per sfruttare al massimo le possibilità del

programma di calcolo, è essenziale disporre di tutte le

informazioni necessarie sui prodotti da utilizzare.

Norma EN 12464-1

Specifica i requisiti illuminotecnici per soddisfare le

esigenze delle prestazioni visive nei diversi ambienti in

interni, ed in particolare nei posti di lavoro, anche muniti

di videoterminali, prescrivendo i valori degli illuminamenti

medi Em, dell’indice di resa cromatica Ra, del comfort

visivo UGR.

Indice unificato di abbagliamento UGR (Unified Glare

Rating)

Definisce la classe di abbagliamento molesto causato

dall’impianto di illuminazione in un interno, tenendo conto

della tipologia degli apparecchi, delle caratteristiche di

riflessione e dimensionali dei locali, della posizione degli

osservatori.

Ad esempio per postazioni CAD le norme EN 12464-1

prescrivono Em = 500 lx, Ra= 80, UGR<=19.

Rappresentazione Grafica delle Caratteristiche di

Emissione Luminosa

La distribuzione delle intensità luminose emesse da un

apparecchio viene rappresentata con un diagramma polare

relativo ad uno o più piani C che sezionano l’apparecchio

passando per il suo baricentro luminoso. I piani e le

intensità sono definiti da un sistema di coordinate sferiche

(C, γ, I). Le curve congiungenti gli estremi dei vettori

intensità su un piano C si chiamano curve fotometriche o

indicatrici di emissione.

Il numero dei piani sezione C è prescritto dalle

raccomandazioni CIE, e richiamato nella Norma Europea

relativa ai rilievi fotometrici e presentazione dei dati (CEN

13 032-1).

Per apparecchi che presentano emissioni rotosimmetriche

l’emissione luminosa viene data da un’unica curva. In tutti

gli altri casi la rappresentazione grafica viene data almeno

dai piani trasversale (C0-180) e longitudinale (C90-270).

Per apparecchi che possono montare lampade

geometricamente uguali ma con flussi luminosi differenti,

generalmente si accetta che il diagramma polare delle

intensità venga rappresentato per un flusso luminoso ideale

di 1.000 lumen e quindi espresso in cd/klm.

Per fonti luminose con ottica incorporata i valori

dell’intensità luminosa massima forniti in questo catalogo

sono assoluti (cd) e non si riferiscono ad un flusso

normalizzato di 1.000 lm, mentre nelle altre fonti gli stessi

valori corrispondono ad un flusso ideale di 1.000 lm (cd/

klm).

Per prodotti LED che incorporano elettronica di controllo

e dissipatore di calore, e che possono essere alimentati

sia a tensione di rete che con alimentatore DC, includendo

apparecchi di illuminazione LED completi muniti di moduli

LED non sostituibili, il metodo di prova LM-79 utilizza la

fotometria assoluta per misurare direttamente il flusso

luminoso totale per una configurazione particolare.

La distribuzione reale della luce e l’intensità luminosa si

misurano direttamente dall’apparecchio di illuminazione

completo.

With the passing of time, we have been exposed to a rising

number of visual impacts. It is currently estimated that

about 75% of the information we processe when relating to

our surroundings is received through our eyes, which work

very much like a camera, through the light that is emitted or

reflected from objects in a given environment. This means

that the information processed by the brain is heavily reliant

on the level and type of light, and how this environment is

illuminated.

The photometric documentation that has been prepared

(especially through the calculation program) aims to provide

lighting designers with the material they need to develop

lighting projects that comply with the EN 12464-1 standard

now in force, in terms of sufficient light distribution, visual

comfort, maximum lighting efficiency and consequently, the

lowest possible energy consumption. In order to make the

most of the calculation program, it is essential to have all

the necessary information on the products to be used.

EN 12464-1 Standard

Sets the technical lighting requirements that satisfy

the needs of indoor visual performance, especially in

workplaces, even when visual display terminals are used,

by prescribing the average illuminance values Em, color

rendering Ra, visual comfort UGR.

UGR (Unified Glare Rating)

Classifies the discomfort glare caused by an indoor lighting

system, taking into account the kind of luminaires, the

reflecting features and size of the rooms, the position of the

observers.

For example, for CAD workstations, EN 12464-1 standards

set Em = 500 lx, Ra= 80, UGR<=19.

Diagram of the Characteristics of Light Output

Luminous intensity distribution is presented in the form of

a polar plot of one or more C planes that cross-section the

luminaire, passing though its light center of gravity. The

planes and the intensity are shown by means of a system of

spherical coordinates (C, γ, I). The curves that join the ends

of the intensity vectors on a C plane are called photometric

curves or output indicators.

The number of C-section planes is prescribed by CIE

recommendations, and is referred to in the European

Standards on photometric measurements and data

presentation (CEN 13 032-1).

For revolving or symmetrical luminaires, light output is

shown as a single curve. In all the other cases, the diagram

shows the horizontal (C0-180) and longitudinal (C90-270)

planes at least.

For luminaires that can be fitted with light sources that are

geometrically the same but with different luminous fluxes,

it is generally accepted that the polar plot shows an ideal

luminous flux of 1,000 lumen and is therefore expressed in

cd/klm.

For light sources that include reflectors, the maximum

luminous intensity values provided in this catalogue are

absolute (cd) and do not refer to a standard 1,000 lm flux.

For other sources, the same values correspond to an ideal

1,000 lm (cd/klm) flux.

For LED-based products incorporating control electronics

and heat sinks, products requiring only line voltage or DC

power supply, including complete LED luminaires with no

replaceable integrated LED sources, the LM-79 test method

uses absolute photometry to directly measure total lumen

output for a particular configuration.

The real distribution of light and light intensity are measured

directly for the complete luminaire.

FOTOMETRIA / PHOTOMETRY

90°

90°

60°

30°

982 Cd/Klm

30°

60°

645