Info and menu parameters

ES 5941Z

5

Info and menu parameters

Info level

Submenu

Content

STA STATUS

Overview of the operating status of the stations and activation of

pumps and valves.

PRI PRIMARY

Measured values and setpoints on the primary side.

SEK SECONDARY

Measured values and setpoints on the secondary side.

AUS REPORTING

Data for the operating hours, energy consumption and flow rates.

Menu level (control parameters)

Submenu

Content

BAS BASIS

Basic settings.

PAR SET VALUE

ZIR CIRCULATION

SCH LAYERED ARRANGEMENT

DES THERMAL DISINFECTION

NAC RECHARGING

WHF WARM HOLDING FUNCTION

Parameters for the hydraulic options:

Parameters for circulation mode.

Parameters for return flow switch.

Parameters for thermal disinfection.

Parameters for the heat request from the heat source.

Parameters for heat exchanger warm holding.

KOM COMMUNICATION

Language, fault messages and bus settings.

STE CONTROLS

Parameters for controlling the station.

MAN MANUAL

Settings for manual operation.

KAS CASCADE

Parameters for cascade configuration.

COD CODE

Code input for activating protected parameters.

5.1

Values, information level

03/2024 Item no. 215790 EA no. 1321

23

The information values and parameters are located

in submenus. The brief description of the parameters

indicates the submenu in which the parameter can

be found.

The visible values vary depending on the chosen

hydraulic variant and option and are dependent on

the code that is entered in the “Key” column, see

Ä Chapter 4.5 ‘Entering the code’ on page 18.