Commissioning and operation

TACOCONTROL Z1 S

6.2.2 Saving changes

NOTICE!

The set parameters are retained even when they

have not been saved. However, they will be lost

in the event of a power failure. To ensure the set

parameters are retained after a power failure, they

must be saved actively.

Personnel:

n Operator

n Heating and sanitary technician

1.

On the main page, select ‘Save settings’ .

2.

Press [ENTER].

6.3 Setting the operating mode

Personnel:

n Operator

n Heating and sanitary technician

1.

On the main page, open ‘Operating mode’ .

2.

Select ‘Automatic’, ‘Manual’, ‘Legio’ or ‘Test’.

The controller automatically starts in automatic

mode, and its control function starts straight away.

05/2024 Item no. 215251 EA no. EA-1291

Operating instructions

25

The operating modes “Manual mode” (Manual),

“Thermal disinfection” (Legio) and “Test proce-

dure” (Test) switch back to automatic mode

(Automatic) after a preset time.