TACOCONTROL Z1 S

Appendix for service personnel

A.2

Saving/loading

Resetting to factory setting

To save data, a USB stick with the FAT or FAT32 file

system should be used.

Loading a new parameter set

Personnel:

n Heating and sanitary technician

1.

Open ‘System’ .

2.

Open ‘Save/load’ .

3.

Activate ‘Reset factory settings’ .

Personnel:

n Heating and sanitary technician

Material:

n USB stick

1.

Insert a USB stick with the parameter file.

2.

Open ‘System’ .

3.

Open ‘Save/load’ .

4.

Select ‘Load settings from USB’ .

Personnel:

n Heating and sanitary technician

Material:

n USB stick

1.

Insert a USB stick.

2.

Open ‘System’ .

3.

Open ‘Save/load’ .

4.

Activate ‘Save settings to USB’ .

The software features a range of predefined parameters that can be

continuously recorded. This function must be activated for recording

to be performed.

Personnel:

n Heating and sanitary technician

1.

Open ‘System’.

2.

Open ‘Save/load’.

Saving a parameter set externally.

Activating trend recording

The data are saved in a format that can only be read

using special software. The data can, however, be

loaded directly onto other controllers.

46

Operating instructions

05/2024 Item no. 215251 EA no. EA-1291