Chemical and Physical Treatments, what to do
DISIFLUx PUMP
Washing – decontamination with DISIFLUX Pump
Intervention steps, the importance of the TESER CST conductivity meter
1 Connectindrainpositionawrappedfilterinpolypropylene(WL-CART-
FA HOT), in order to easily drain into the sewer system the liquid
within the system, in compliance with the provisions of Legislative
Decree 152 of April 3, 2006 concerning “Environmental protection
regulations”.
2 Drain the system to eliminate about 50 – 60 % of dirt present in the
circuit.
3 Add ANTINEx+Thermakil
®
about 3 – 5 % from the total circulating
liquid and leave in for about 2 – 6 hours, depending on the size of the
system.
4 CheckwithaspecialconductivitymeterTESTERCSTtheconductivity
of the circulating liquid to check if you added the right concentration of
additive to the system.
5 Drain the system and rinse with plenty of water until the latter is
clear; make sure the value of electrical conductivity complies with the
standard values for tap water (< 1000 μS/cm as per Standard UNI
8065:2019).
6 Fillthesystemandaddtheprotective-filmadditiveFILMAx+Thermakil
®
about 1 – 2 % with water with hardness ranging from 10 to 15 °f previously
treated with water softener of the AQUATEMIT
®
series, and check
with the special Molybdenum Kit and Tester CST the concentration of
molybdenum and the electrical conductivity of the circulating liquid.
AQUATEMIT
®
Self-adaptive water softener
Performance electrical
conductivity vs. additives
%
Additives
5
4
3
2
1
0,5
*
(Tester CST limit)
Mains
(Total Hardness about 20 °f)
Dirty due to the
heating system polluted
Due to the heating system
Due to the heating system
Due to the heating system
Due to the heating system
Due to the heating system Antinex+Thermakil
®
1
Due to the heating system Antinex+Thermakil
®
2
Due to the heating system Antinex+Thermakil
®
3
Due to the heating system Antinex+Thermakil
®
4
Due to the heating system Antinex+Thermakil
®
5
350
> 4000
*
400 ± 10
700 ± 10
1100 ± 10
1500 ± 10
1250 ± 10
2300 ± 10
3250 ± 10
4300 ± 10
5300 ± 10
Electrical Conductivity (μS/cm)
Check the Electrical Conductivity by means of a conductivity meter
TESTER CST on mains water and water treated with Antinex+Thermakil®
to 3 % and system water treated with Filmax+Thermakil® to 2 %.
51
Filmax+Thermakil
®
0,5
Filmax+Thermakil
®
1
Filmax+Thermakil
®
2
Filmax+Thermakil
®
3
Type of water
Additive
% Conductivity (μS/cm)
% AnTIneX+Thermakil
®
%
F
I
L
m
A
X
+
T
h
e
r
m
a
k
i
l
®
500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500
