Overview

TACOCONTROL Z1 S

Signal

Description

Continuous

light, green

Controller operating

Flashing

light, green

Controller starting

Continuous

light, red

Controller stopped

Voltage transformer

Fig. 6: Voltage transformer

Fuse

Fig. 7: Fuse

Terminal block

Fig. 8: Terminal block

The voltage transformer supplies the circuit board with 24V. Compe-

nents running with 24V are supplied via the circuit boards.

The current consumption by the controller is limited to a maximum of

2.5 A by the integral fuse.

The sensors are connected to the terminal block. The terminal block

is connected to the circuit board and sends the sensor data to the

circuit board.

The terminal block is prewired. Only the wiring of the power supply

has to be filled ex-works. Further details are shown on the wiring

scheme of the HIU.

3.4 Human machine interface (HMI)

The controller is operated using a human machine interface (HMI)

that is connected to the LAN socket. The HMI is operated using the

buttons. A number of buttons perform a different function when they

are pressed and held (for more than 2 seconds). The HMI is used to

display the data. Data is only saved to the circuit board.

05/2024 Item no. 215251 EA no. EA-1291

Operating instructions

17